Advertisement
Available languages
Available languages
Thisvacuumcleaneris designedwithanAutomatic
HeightAdjustment w hichadjuststhefloor nozzleto
the properheightof any carpetpile.
Theheightoffloor nozzleis instantlyand
automatically adjustedwhenyou movefrom one
carpetedareato another.
Release the handle by tilting the handle back
and pushing on either front nozzle corner with
your foot.
The vacuum
cleaner has three
positions:
- Upright f or storage
andwhenusing
cleaningtools.
- Angledfor carpet
andfloorcleaning.
- Lowfor reaching
underfurniture.
The On/Off switch is located on the vacuum
cleaner body just below and to the side of the
handle. Push the switch to ON to start the
cleaner and to OFF to stop it.
Cord
Handle
Switch
Crevice
Tool _'_'
•
i
Extension_'_
ii
Wand
Dusting __
i
Brush
Hose
Hose Connector
TO USE ATTACHMENTS
Remove the lower end of the hose from the
cleaner by grasping the hose connector,
twisting and pulling straight out.
NOTE: The motor protector may open causing
poor pick up, when using attachments or when
cleaning new carpet, due to reduced airflow
caused by the attachments themselves, or by
new carpet fuzz filling the bag quickly. See
CLOG REMOVAL.
WARNING
Electric shock and Personal Injury
Hazard
Disconnect e lectrical s upplybeforeservicing
or cleaningthe unit. Failureto do socould
resultin electricshockor personalinjuryfrom
cleanersuddenlystarting,
-7-
Advertisement
