Galaxy 721.35078 Owner's Manual page 14

WARNING
Electric Shock or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in
electric shock or personal injury
from cleaner suddenly starting.
Frequently check and remove hair, string and
lint build-up in the agitator brush area. If build-up
becomes excessive, follow the steps below.
TO REMOVE BELT
Slide E-Z Belt
Check latches
outward and
remove nozzle
cover.
Disconnect power cord from electrical outlet.
Latches
Nozz
Cover
Position hands on the agitator. If the belt is still
attached to the agitator, sever with scissors and
remove it. Carefully lift the right end of the
agitator and then the left end.
Agitato_
Note: It may be necessary to pull on the edge
of the bumper to allow the ends of the agitator
to be removed easily.
WARNING
Personal Injury Hazard
Be careful when removing the
agitator as the belt tension is high.
Failure to do 8o could result in
personal injury from the agitator
releasing quickly and snapping away.
TO CLEAN AGITATOR
Note: In order to keep cleaning efficiency high
and to prevent damage to your vacuum, the
agitator must be cleaned every time the belt is
changed.
The agitator must be cleaned according to the
following schedule:
Vacuum Use Clean Agitator
HEAVY every week
(used daily)
MODERATE every month
(used 2-3 times/week)
LIGHT every 2 months
(used 1 time/week)
CAUTION
Do not disassemble the end cap,
or you will damage the agitator.
End Cap
-14-