Reference; Controlling An Lg Tv With The Supplied Universal Remote Control; Controlling Other Tvs With The Universal Remote Control - LG BH100 Owner's Manual

BHI00 OM LGEUS ENG 1/3/07 2:41 PM Page 24
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
iiiiiiiiiiiiiiiiiiii
Reference
Controlling an LG TV with the
Supplied Universal Remote
Control
You can control the volume, input source, and power
state of your LG TV with the supplied Universal
Remote Control.
You can control your TV using the buttons below.
TV POWER- _ _o_.
M_R_R _ R_F_r
Button _
_F_CH LO_
_u_o SUaTrlLE _NGL_
r_rn r_=_ IZN23
Buttons
1 2 3
4 5 6
Number- c=_ c=_ _
Buttons _:_ _ 9
By pressing You can
TV POWER Turn the TV on or off.
INPUT Switch the TV's input source
between the TV and other input
sources.
CH +/- Scan up or down through
memorized channels.
VOL +/- Adjust the volume of the TV.
MUTE Temporarily turns TV sound
OFF, press again to restore.
Note:
Depending on the unit being connected, you may
not be able to control your TV using some of the
buttons.
Controlling other TVs with the
Universal Remote Control
You can control the volume, input source, and power
state of non-LG TVs as well. If your TV is listed in
the table on the next page, set the appropriate man-
ufacturer code.
1. While holding down TV POWER button, press
the number buttons to select the manufacturer
code for your TV (Refer to table on the next
page).
2. Release TV POWER button.
Notes:
• Depending on your TV, some or all buttons may
not function on the TV, even after entering the
correct manufacturer code.
• If you enter a new code number, the code num-
ber previously entered will be erased.
• When you replace the batteries of the remote,
the code number you have set may be reset to
the default setting. Set the appropriate code
number again.