LG BH100 Owner's Manual page 19

BHI00 OM LGEUSENG 1/3/07 2:41 PM Page 19
5.1 Speaker Setting
Make the following settings for the built-in 5.1 chan-
nel surround decoder.
1. Press SETUE The setup menu appears.
2. Use • / • to select the [Audio] option then press
I_ to move to the second level.
3. Use • / • to select the [5.1 Speaker Setting]
option then press I_ to move to the third level.
4. Use • / I_ to select the desired speaker.
5. Adjust options using • / • / • / I_ buttons.
6. Press • / • repeatedly to return to the previous
menu screen.
Speaker selection
Select a speaker that you want to adjust. (Front Left
Speaker, Center Speaker, Front Right Speaker, Rear
Right Speaker, Rear Left Speaker, er SubWeefer.)
Size
Press • / I_ to set a mode. (Large, Small or None)
If you have connected the system to a speaker with
a low frequency of 100Hz or below, select [Large].
If you have connected the system to a speaker with-
out a low frequency of 100Hz or below, select
[Small]. If you have not connected a subwoofer,
always select [Large] for Front speaker (L/R).
When you do not have a certain speaker connected,
select [None].
Front L/R speaker's size can be set to [Large[ or
[Small].
If Front L/R speaker's size is set to [Small], Rear
and Center speaker's size can only be set to [Small]
or [None].
Subwoofer's size can be set only to [Large] or
[None]. Select [Off] to disable the subwoofer speak-
er. (This option can only be selected when the Front
(L+R) speakers are set to Large.)
Test
Select [All] using • / I_ to test the signals of each
speaker.
_ont Left (L)-_ C_ter -_ Front R%ht (R)
Rear Right (R) Rear Left (L) SubWoofer
Adjust the volume during operation of the test tone
on the Amplifier or AN Receiver, so that all speak-
er's volumes are the same from the listener's posi-
tion.
Note:
If a speaker's sound is not heard, change the
speaker's size setting.
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii