Page 1
i,iiii:i_G OWNFR'S MANUAL BOTTOM FREE REFRIGERATOR Please read this manual carefully before operating your set and retain it for future reference. MANUAl .... DE USUARIO REFRIGERADOR CON CONGELADOR INFERIOR Lea detenidamente este manual antes de empezar a utilizar el refrigerador y gu_rdelo como referencia...
Page 2
Food Storage Guide Storing Frozen Food 26-27 Refrigerator Section 27-29 Congratulations on your purchase Refrigerator Shelves 27-28 welcome to the LG family. Crisper Humidity Control Your new LG French Door Refrigerator Door Racks combines advanced cooling technology with simple operation...
Page 3
This manual contains several important safety notices. Always read and obey all of the following safety messages. This is the safety alert symbol. This symbol is a warning to potential dangers that could cause death, injury or damage to you, others or the product.
Page 4
(according to the National rating). This provides our service center or qualified LG technician to avoid the best performance and prevents an overload which any risk. could cause a fire from the overheating of the cables.
Page 5
80-130 ice cubes in a 24-hour period to keep dispenser fully supplied. in-door design creates more shelf space. RISPERS LG's crispers preserve humidity help vegetables stay crisp. GLIDE'N'SERVE (In some models). Provides storage space with variable temperature control...
Page 6
4 DOORS MODELS (LMX25988**, GM-B258R4*M, GM-L26AN*JP). KEY PARTS AND COMPONENTS In addition to the special features and components outlined in the Special Features secfion, there several other important components that referenced in this manual. LED INTERIOR LAMPS DJUSTABLE REFRIGERATOR SHELVING Refrigerator interior is lit by the LED array.
Page 7
3 DOORS MODELS (LFX25978**, GM-B258R*). KEY PARTS AND COMPONENTS In addition to the special features and components outlined in the Special Features section, there several other important components that referenced in this manual. LED INTERIOR LAMPS DJUSTABLE REFRIGERATOR SHELVING Refrigerator interior is lit by the LED array.
Page 8
3 DOORS MODELS (LFX25778**, GM-B259R*, GM-L268F*XP). KEY PARTS AND COMPONENTS In addition to the special features and components outlined in the Special Features section, there several other important components that referenced in this manual. LED INTERIOR LAMPS DJUSTABLE REFRIGERATOR SHELVING Refrigerator interior is lit by the LED array.
3. Install the refrigerator in an area between 55 °F (13 °C) and 110 °F (43 °C)If the surrounding temperature is lower or higher than previously mentioned, it can EXCESSIVE WEIGHT HAZARD adversely affect the unit Use the assistance of two or more persons to move install the refrigerator...
TOOLS NEED _[1/4 1/4 in 3/32 c::::::::_j_ 10 mm Hex Socket Wrench Phillips Screwdriver Flat Head Screwdriver Allen Wrench NOTE: It is always recommended that the doors be removed when it is necessary to move the refrigerator through narrow opening. If it is necessary to remove the handles...
Page 11
HOW TOREMOVE A NDINSTALL R EFRIGERATOR DOOR 1. Removing Refrigerator Doors Remove left-side door first NOTE: Handle, hinge hinge cover appearance vary from illustrations this page WARNING • Disconnect electrical supply to the refrigerator before installing Failureto do so could result in death or serious injury...
Page 12
HOW TO REMOVE A NDiNSTALL REFRIGERATOR DOOR (CONT.) 2. Refrigerator Door Reinstallation Install the right-side door first. Leff Door Right Door • Lower the door onto the middle hinge pin (7). • Lower door onto middle hinge (1). • Make sure the door is aligned with the cabinet.
Page 13
HOW TO REMOVE AND INSTALL THE PULL Insert water supply tube into connector. OUT DRAWER (4 DOORS MODELS). Insert tube at least in. (15 ram) into connector. 1. Removing Pull oufTop Drawer IMPORTANT: To avoid possible injury, product property damage, you will need two persons perform the following...
Page 14
° With both hands, bend the center bar just enough °With both hands, hold both sides of the door to allow the gears on both ends to release from (Fig. 3) and pull it up to separate it from the rails. their tracks.
Page 15
• Hook door supportsC)into rail tabs.(_)(Fig. Fig.2 Fig.1 • Hook door supportsC)into rail tabs.(_)(Fig. • Lower door into final position and tighten screws. (Fig.3) • Lower door into final position and tighten screws. (Fig. 3) • With the drawer pulled out to full extension, insert the drawer and ice bin in the rail.
Page 16
HOWTO REMOVE A NDiNSTALL T HEPULL • Remove the screws of the rail on both sides. OUTDRAWER ( 3 DOORS MODELS). (Fig. 4) 1. Removing Pull Drawer Fig. 4 IMPORTANT: To avoid possible injury, product property damage, you will need two persons perform the following instructions.
Hook door supports into rail tabs. (Fig. 10) Push the rails back into drawer cavity. With both hands, hold the center of the bar and push it in so that both rails go back simultaneously. (Fig.7) Fig. 10 Door (Fig. S) Fig.7 •...
CLOSING ANDALiGNiNG THEDOORS Aligning the Doors To adjust height of the doors, wrench (Included with the User Manual) to adjust bolt Closing the Doors the door hinge (counter clockwise to raise or clockwise Your refrigerator has two front leveling screws, the right and one on the left.
CONTROL PANEL FEATURES NOTE: shape of the buttons not match your model. LED DISPLAY The LED display shows the temperature settings, dispenser options, water filter, door alarm, and locking status messages. ICE TYPE BUTTON The ICE TYPE button is used to select Cubed Ice or Crushed Ice.
Page 20
DISPLAY The LED display shows the temperature settings, dispenser options, water filter, door alarm, locking status messages. DISPENSER SELECTION INDICATOR Shows Cubed ice or Crushed Ice selection that will be dispensed when the push switch pressed. "_'_O FREEZER TEMPERATURE Indicates the set temperature of the freezer compartment...
ADJUSTING T HE TEMPERATURES POWER SAVING MODE (in some models) DISPLAY • The display will remain off until the next time the door is opened. • The display will also turn on when any button Adjust Freezer Temperature pressed, and it will remain on for 20 seconds after To adjust...
OPERATING THEDISPENSER WATER DISPENSING CRUSHED DISPENSING Press the ICE TYPE Press the push water switch with a glass or other container and chilled water will button to illuminate Crushed Ice icon. be dispensed. When the water switch is pressed, Press the push ice switch light will be illuminated.
SETTING T HEFUNCTIONS "X'ACTIVATING ICE PLUS SETTING THE DISPENSER LOCK Press and hold the Press the ICE PLUS/ ALARM/LOCK button ENERGY SAVING or ICE for three seconds to lock PLUS button once to the dispenser and all of activate the ICE PLUS the other control panel...
Page 24
SPACEPLUS ICE SYSTEM CAUTION • Keep hands and tools out of the ice compartment NOTE: If the On/Off switch on the icemaker is set to door and dispenser chute. You could break some- Off for an extended time, the ice compartment will thing or injure yourself.
AUTOMATIC I CEMAKER WARNING Ice is made in the automatic icemaker and sent to the Personal Injury Hazard dispenser. The automatic icemaker can make 10 or 12 • NOT place fingers or hands on the automatic ice cubes (depending on your device) at a time, above icemaking...
FOOD STORAGE GUIDE ADJUSTING CONTROL SETTINGS Give the refrigerator time to cool down completely before ITEMS HOW TO STORE adding food. It is best to wait 24 hours before adding food to the refrigerator. The mid-settings indicated Wrap store food Storing Fresh Food...
Page 27
REFRIGERATOR SECTION Packaging Recommendations: sealed plastic containers. plastic containers with a smooth surface. REFRIGERATOR SHELVES Package with aluminum foil of high resistance. shelving of your refrigerator be adjusted Wrap with paper layered with plastic. comply with your storage necessities; Depending water proof plastic.
Sliding Shelves (in some models) You can slide some of the shelves in your refrigerator towards inside or outside like explained below. • To slide the shelf towards the outside: Pull towards you, figure • To slide the shelf towards the inside: Push until it stops, figure To remove or replace...
Glide'N'Serve (In some models). WARNING: Somebody be hurt if door racks The Glide'N'Serve provides storage space with avariable are not firmly assembled. temperature control that keeps thecompartment colder CAUTION: allow children play with than refrigerator. This drawer can be used for large party baskets.
FREEZER SECTION WARNING: In order to prevent accidents, such as suffocation, DO NOT let children ICE BIN (In some models) pets play inside the durabase. To remove Ice Bin: WARNING: There is enough space for the children • Pull the drawer as much as possible (1).
BACK COVER EXPLOSION HAZARD ELECTRICAL SHOCK HAZARD Before you begin, either unplug the refrigerator or turn off power at the circuit breaker or fuse box. NOTE: Back Cover should only Donotuseflammable cleaners. Notfollowing t hese instructions cancause d eath, explosion orfire. removed qualified technician.
POWER iNTERRUPTiONS WHEN MOVING In case of a black out, call your electric company If you decide to take your refrigerator with when and ask how long it will last. moving, consider the following: In case of a 24 hour or less black out, do not open the refrigerator;...
Page 33
REPLACING THEWATER FILTER (TYPE I) It is recommended that replace filter approximately every 6 months, when water filter indicator reaches 0 months, or when water dispenser noticeably decreases out-put. Remove oOd cartridge. Pull filter cartridge. Press push button to open filter cover.
REPLACING THEWATER FILTER Replace with a new cartridge. NOTE: After replacing filter_ flush gallons through filter before (flush approximately 5 minutes). Check filter leaks. FILTER CHANGE MONTH When the water filter indicator displays message 0 Filter Month, hold 3 seconds. Reset the water filter status display and indicator...
Page 35
Performance DataSheet ModeE LGAD036006101-S UseReplacement Cartridge: AD036006101 The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system as specified in NSF/ANSI Standard 42 and Standard...
REPLACING THEWATER FILTER (TYPE 2) 2. Hold filter with unlock symbol E_ " facing towards as shown in the picture below. Insert WATER FILTER filter into filter receptacle right side of the Filter Reset: When the filter icon turns on, you have to refrigerator compartment.
Page 37
Performance Dafa Sheer Models Number 5231JA2002A-S Use with replacement cartridge 5231JA2002A This system has been tested according to NSF/ANSI Standards 42 for the reduction of the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal...
Page 38
1-888-LGCANADA (24 hours per day/7 days install a pressure limiting valve. Contact a plumbing per week or visit our website at www.lg.com). professional if you uncertain to check your water pressure. 3M is a trademark of 3M Company. •...
Page 39
State of California Department of Public Health Water Treatment Device Certificate Number 09-2018 Date Issued: December 15, 2009 Trademark/Model DesiRnafion _cement Elements ADQ 36006101-S ADQ36006101 Manufacturer: Cuno Inc. The water treatment devket S) listed on this certificate have met the testing requirements pursuant to Section 116830 of the Health and Safety Code for the following health related contaminants: Microbiolo_icai Contaminants and Turbidity...
BEFORE START determine much pipe material needed, measures distances between valves located behind the refrigerator and the source of water and add water source is not guaranteed refrigerator to that S feet (2,4m) Make sure there is sufficient pipe manufacturer Follow instructions carefully...
Page 41
3. DRILL A HOLE FOR THEVALVE 7.CONNECT PIPELINE TO VALVE Place the compression nut and the copper pipe ferule at Drill a 1/4" (6,35 ram) diameter hole water pipeline. of the pipe connect to the valve. Make sure Remove jagged edges produces pipe...
11.CONNECT REFRIGERATOR ° Remove the ring plug (1) from the valve located at the top of such device. pipeline that does vibrate ® refrigerator wall. Push refrigerator against wall. 12. TURN ICE MAKER Turn ice maker switch into the ON position. Ice maker will start only after...
Page 43
UNDERSTANDING SOUNDS HEAR Your new refrigerator might produce certain noises that your previous refrigerator did not. It is normal if you worry. Most of the new sounds you will be hearing are actually normal and expected. Hard surfaces like walls or floor increase sounds and make them...
Page 44
Problem PoSsible Causes Solutions STRANGE SOUNDS ,The refrigerator correctly ,You need to adjust leveling screws due the OR SNOOZING/ positioned, floor is unleveled or weak. Read the Installation Vl BRATIONS section. • The replaced refrigerator • Modern refrigerators with bigger storage older model.
Page 45
Problem Possible CauSes • The refrigerator defrosting ,The water will evaporate. It is normal that some THERE'S WATER cycle, water falls on the bin. THE DRAINING • It's more humid than usual. • It might take a while for the water to evaporate. This is normal when the weather is hot and humid.
Page 46
1-800-243-0000. Only use the Smart Diagnosis feature when instructed to do so by the LG call center agent. The transmission sounds that you will hear are normal and sound similar to a fax machine.
Page 47
LG will at its option repair or replace the product. This limited warranty is valid only to original retail purchaser...
Page 48
LG ELECTRONICS CANADA, INC. LG REFRIGERATOR LIMITED WARRANTY - Canada WARRANTY: Should your LG Refrigerator ("Product") fail due to a defect in material or workmanship under normal home use during warranty period set forth below, Canada will at its option...
Page 50
Life's Good 1-800-243-0000 USA, Consfne USA, Commerca User 1-888-865-3026 1-888-542-2623 CANADA www.lg.com...