Door Racks - LG GV-B258R4 Series Owner's Manual

Bottom freezer refrigerator
Table of Contents

Advertisement

Glide'N'Serve
(In some models).
The Glide'N'Serve
provides
storage
space with avariable
temperature
control
that keeps thecompartment
colder
than
refrigerator.
This drawer
can be used for large party
trays, deliitems,
or beverages.
TEMP. SELECTOR
WARNING:
Somebody
can
be hurt
if door
racks
are not firmly
assembled.
CAUTION:
DO
NOT
allow
children
to
play
with
baskets.
Sharp
corners
on
baskets
could
cause
injury.
NOTE:
DO NOT adjust
a rack that is loaded
with food.
DAIRY
COMPARTMENT
(in some
models)
• To remove
the dairy
compartment,
simply
lift it and
pull straight
out (1).
• To replace
the dairy compartment,
slide it in above the
desired
location
and push clown until it stops (2).
Selection
Button
• When
"MEAT"
is selected,
the temperature
of the
Glide'N'Serve
can be kept around
34°F(1°C).
This
feature
helps keep meat
or fish fresh
for a longer
time.
The Glide'N'Serve
temperature
can be main-
tained
under
recommended
temperature
setting
Freezer
: O°F (-1S°C), Referigerator:
37°F (3°C).
When
"DELl"
is selected,
the temperature
of the
Glide'N'Serve
can be kept around
3S°F (3°C).This
feature
helps keep food
fresh
for a longer
time.
The Glide'N'Serve
temperature
can be maintained
under
recommended
temperature
setting
Freezer:
O°F (-1S°C),
Referigerator
: 37°F (3°C).
• When
"PRODUCE"
is selected,
the temperature
of
the Glide'N'Serve
can be kept around
41°F(5°C).
This
feature
helps keep food
fresh
for along time.
The
Glide'N'Serve
temperature
canbe
maintained
under
recommended
temperature
setting
Freezer
:
O°F (-1S°C),
Referigerator
: 37°F (3°C).
DOOR RACKS
The
door
racks
are
removable
for
easy
cleaning
and
adjusting.
• To remove
the
rack, simply
lift the rack
up and
pull
straight
out (1).
• To replace
the
rack,
slide
it
in above
the
desired
support
button
and push
clown until it stops (2).
DISPENSER
DRIP TRAY (in some models)
The
dispenser
drip
tray has no self-draining
function.
It should
be cleaned
regularly.
Remove
the cover by pressing
and pulling
the
tray. Dry it with a cloth. To reinstall
the tray,
slightly
tilt the front of the tray and snap the
ribs into the holes.
29

Advertisement

Table of Contents
loading

Table of Contents