Receiving Traffic Data Using A Traffic Receiver; Traffic Receiver Subscriptions; Enabling Traffic; Viewing Traffic On The Map - Garmin driveluxe 51 Owner's Manual

Receiving Traffic Data Using a Traffic
Receiver
Heated (metallized) windshields could degrade the performance
of the traffic receiver.
A traffic receiver receives traffic data from an over-the-air
broadcast signal, where available. An over-the-air traffic receiver
cable is available as an accessory for all product models. Go to
your product page at garmin.com
compatible traffic receiver cable accessory. Traffic data is not
available in all areas.
Connect the device to vehicle power using the traffic receiver
cable (Mounting and Powering the Garmin DriveLuxe Device
in Your Vehicle, page 1).
When you are within a traffic coverage area, your device can
display traffic information and help you avoid traffic delays.

Traffic Receiver Subscriptions

A regional traffic data subscription is included with most traffic
receivers. You can add subscriptions for additional regions to
your traffic receiver. For more information, go to
/traffic.
Viewing Traffic Subscriptions
Select Settings > Traffic > Subscriptions.
Adding a Subscription
You can purchase traffic subscriptions for other regions or
countries.
1
From the main menu, select Traffic.
2
Select Subscriptions >
3
Write down the FM traffic receiver unit ID.
4
Go to www.garmin.com/fmtraffic
and get a 25-character code.
The traffic subscription code cannot be reused. You must
obtain a new code each time you renew your service. If you
own multiple FM traffic receivers, you must obtain a new
code for each receiver.
5
Select Next on the device.
6
Enter the code.
7
Select Done.

Enabling Traffic

You can enable or disable traffic data.
1
Select Settings > Traffic.
2
Select the Traffic check box.

Viewing Traffic on the Map

The traffic map shows color-coded traffic flow and delays on
nearby roads.
1
From the main menu, select Apps > Traffic.
2
If necessary, select
traffic map.

Searching for Traffic Incidents

1
From the main menu, select Apps > Traffic.
2
Select > Incidents.
3
Select an item in the list.
4
If there is more than one incident, use the arrows to view
additional incidents.

Voice Command

NOTE: Voice command is not available for all languages and
regions, and may not be available on all models.
Voice Command
NOTICE
to find and purchase a
garmin.com
.
to purchase a subscription
> Legend to view the legend for the
NOTE: Voice Activated Navigation may not achieve desired
performance when in a noisy environment.
Voice command allows you to use your device by saying words
and commands. The voice command menu provides voice
prompts and a list of available commands.

Setting the Wakeup Phrase

The wakeup phrase is a word or phrase you can say to activate
voice command. The default wakeup phrase is Voice Command.
TIP: You can reduce the chance of accidental voice command
activation by using a strong wakeup phrase.
1
Select Apps > Voice Command >
2
Enter a new wakeup phrase.
The device indicates the strength of the wakeup phrase as
you enter the phrase.
3
Select Done.

Activating Voice Command

Say your wakeup phrase.
The voice command menu appears.

Voice Command Tips

• Speak in a normal voice directed at the device.
• Reduce background noise, such as voices, or the radio, to
increase the accuracy of the voice recognition.
• Speak commands as they appear on the screen.
• Respond to voice prompts from the device as needed.
• Increase the length of your wakeup phrase to reduce the
chance of accidental voice command activation.
• Listen for two tones to confirm when the device enters and
exits voice command.

Starting a Route Using Voice Command

You can say the names of popular, well-known locations.
1
Say your wakeup phrase
page 15).
2
Say Find Place.
3 Listen for the voice prompt, and speak the name of the
location.
4 Say the line number.
5 Say Navigate.

Muting Instructions

You can disable the voice prompts for voice command without
muting the device.
1
Select Apps > Voice Command >
2
Select Mute Instructions > Enabled.

Voice Control

For regions where the Voice Command feature is unavailable,
the Voice Control feature is activated. Voice Control allows you
to use your voice to control the device. Before you can use the
Voice Control feature, you must configure it for your voice.

Configuring Voice Control

The Voice Control feature must be configured for a single user's
voice and does not work for other users.
1
Select Apps > Voice Control.
2
Follow the on-screen instructions to record commands for
each voice control phrase.
NOTE: You do not have to read the exact phrase on the
screen. You may say an alternative command with the same
meaning based on your preference.
> Wake Up Phrase.
(Setting the Wakeup Phrase,
.
15