Advertisement
➋
Connecting the GFL 10 Adapter to an
Existing NMEA 2000 Network
Configuring the GFL 10 Adapter
notiCe: This section provides specific configuration information for the GFL 10 adapter
using your compatible Garmin display device. To access the NMEA 2000 configuration menu
on your display device, consult the documentation provided with your display device.
Configuring the NMEA 2000 Fluid Type
You can indicate the type of fluid that is in the tank with which each GFL 10 adapter is
associated.
1. From the NMEA 2000 Devices list, select the GFL 10 device.
2. Select an option:
•
For most Garmin chartplotters, select
•
For other Garmin marine devices, select
3. Select a fluid type.
4. Select OK.
Configuring the Tank Number
If your boat has multiple fluid tanks, you can indicate which tank each GFL 10 adapter is
associated with.
1. From the NMEA 2000 Devices list, select the GFL 10 device.
2. Select an option:
•
For most Garmin chartplotters, select
•
For other Garmin marine devices, select
3. Select a tank number.
4. Select OK.
➊
➋
➌
➍
➎
➊
GFL 10 adapter
➋
NMEA 000 device (not included)
➌
Drop cable (optional - not included)
➍
T-connector (one included)
➎
Existing NMEA 000 network
Review
>
N2K Fluid
Config
>
N2K Fluid
Review
>
Tank
Number.
Config
>
Tank
Number.
GFL 10 Installation and Configuration Instructions
Type.
Type.
Advertisement
