GBT
10 Installation and Configuration Instructions
™
Use the Garmin
GBT 10 Bennett Trim Tab Adapter to adapt analog information provided by
®
a Bennett Trim Tab Position Indicator (Bennett TPI), or by the Bennett trim tab sensors on
your boat, to your NMEA 2000
information on the compatible Garmin display devices connected to your NMEA 2000 network.
For a list of compatible Garmin chartplotters and devices, visit www.garmin.com.
Compare the contents of this package with the packing list on the box. If any pieces are
missing, contact your Garmin dealer immediately.
Product Registration
Help us better support you by completing our online registration today. Go to
.com. Keep the original sales receipt, or a photocopy, in a safe place.
Contact Garmin
Contact Garmin Product Support if you have any questions while using your GBT 10 adapter.
In the USA, go to www.garmin.com/support, or contact Garmin USA by phone at (913)
397.8200 or (800) 800.1020.
In the UK, contact Garmin (Europe) Ltd. by phone at 0808 2380000.
In Europe, go to
www.garmin.com/support
information, or contact Garmin (Europe) Ltd. by phone at +44 (0) 870.8501241.
See the Important Safety and Product Information guide in the compatible Garmin display device box for
product warnings and other important information.
Caution: Always wear safety goggles, ear protection, and a dust mask when drilling, cutting, or
sanding.
notiCe: When drilling or cutting, always check the opposite side of the drilling or cutting
surface.
Needed Tools and Supplies
•
Heat-shrink tubing and a heat gun
•
Cable ties
•
Additional NMEA 2000 cabling and connectors (optional)
July 2009
network. Your GBT 10 adapter allows you to observe trim tab
®
and click
190-01081-04 Rev. A
Contact Support
for in-country support
http://my.garmin
Printed in Taiwan