Advertisement
KODAK PICTURE CD/JPEG CD OPERATIONS
1.
PLAY MODES
P
ress REPEAT button to change play mode.
P
ress stop button to show folders on the disc.
2. SKIP TO NEXT/PREVIOUS PICTURE
Press NEXT button to skip to the next picture or PREV
button to the previous picture.
If no key is pressed for a few seconds, it will skip to next
picture automatically.
3.
PICTURE ROTATIONS
Press RIGHT and LEFT navigation buttons to rotate the
picture Clockwise and anti-clockwise respectively.
4.
PICTURE FLIPS
Press UP NAVIGATION button to flip the picture vertically.
Press DOWN NAVIGATION button to flip the picture
horizontally.
5.
PICTURE ZOOM IN/OUT
Press ZOOM button continuously, the picture will zoom in
and out as a response to each press. If the picture is
enlarged, you may use the navigation buttons to view
blocked parts of the picture.
COLOR AND BRIGHTNESS ADJUSTMENT(FOR
THE LCD SCREEN)
Press SCREEN ON/OFF button on the remote control
to adjust the color intensity and brightness respectively.
Press and hold this button for a moment to open or
close the TFT display.
INITIAL SETTINGS
Initial settings page is for you to make your preferred
settings up for your player. Once the initial settings are done
they are retained in the CPU of the player until otherwise
modified.
COMMON PROCEDURES FOR INITIAL SETTINGS
1. Press SETUP button.
2. Use the navigation buttons to select the item you want to
modify, press OK/ENTER( PLAY/PAUSE) button to
confirm, setting page with further setting items displayed
shows on the TV screen. Again use navigation buttons to
make changes. Press again OK/ENTER(PLAY/PAUSE)
button to confirm modifications.
3. Use navigation buttons to switch to another setting on
the main setting page.
4. Press SETUP button to exit main setting page.
1. GENERAL SETUP
1.1 TV DISPLAY
- it is used to select the TV scan mode,
please set as per your TV set.
Options: Normal/PS
Normal LB
Wide
1.2 LCD MODE
- it is used to select the LCD mode.
Options: 4:3
16:9
1.3 OSD LANGUAGE
- it is used to select different On
Screen Display language for different user.
1.4 SCREEN SAVER
- when the player is not in used for
several minutes, a running DVD logo will move across the
TV screen to protect the TV screen.
Options: On: Screen saver is enabled
Off: Screen saver is disabled
1.5 EXIT SETUP
- it is used to exit the setup menu.
2. AUDIO SETUP
2.1 DOWNMIX
Options:
LT/RT-
Left/Right mix mode
STEREO-
Select this option if you don't have a 5.1
channels amplifier.
2.2 EXIT SETUP
- it is used to exit the setup menu.
3. VIDEO QUALITY SETUP
3.1 SHARPNESS
- to set the sharpness for display.
Options: High Medium Low
3.2 BRIGHTNESS
- to set the brightness for display.
3.3 CONTRAST
- to set the contrast effect for display.
3.4 HUE
- to set the hue for display.
3.5 SATURATION
- to set the saturation for display.
3.6 EXIT SETUP
- it is used to exit the setup menu.
4. SYSTEM SETUP
Please follow the below steps to enter the System Page:
First, power on the unit with the disc tray is empty or the disc
door is opened, then press SETUP button and enter the
System Page by pressing NAVIGATION buttons.
4.1 TV TYPE
- it is used to select the TV mode.
Please select this option as per your TV set.
4.2 AUDIO
- select preferred audio language.
(DVD only - need disc software support)
4.3 SUBTITLE
- select preferred subtitle language.
(DVD only - need disc software support)
4.4 DISC MENU
- select preferred disc menu language.
(DVD only - need disc software support)
4.5 PARENTAL
- select rating levels. You must enter
password first then change the rating level via navigation
up/down button (DVD only - need disc software support)
4.6 PASSWORD
Options: Change
Select to change password
4.6.1 OLD PASSWORD
4.6.2 NEW PASSWORD
4.6.3 CONFIRM PWD
Procedure to change password:
1) Enter old password in the OLD PASSWORD row
2) Enter new password in the NEW PASSWORD row
3) Enter the new password again in the CONFIRM PWD row
You may reset the password if you forget the old password
by using the supervisor password:
4.7 DEFAULT
- Reset to factory settings.
4.8 EXIT SETUP - it is used to exit the setup menu.
EXTERNAL MEMORY MEDIA OPERATION
(USB&SD/MMC CARD)
Prepare the player for External Memory media operation
1. Slide the POWER switch to ON position, plug a USB data
traveller filled with Audio/video files into the USB port or
insert the SD/MMC card into the card slot, the USB or the
SD/MMC card is successfully detected and read after a
few seconds, at the same time, the TV screen will show
all its folders.
2. You may play the files stored in the storage media much
in the same way as you do the Mp3 disc.
Note: Press and hold STOP button to make change
between DVD, MCR and USB by pressing Navigation
up/down button on the remote.
4
1389
Advertisement
