Epson Stylus NX300 Series Quick Manual page 21

3. Do one of the following to dial the fax number:
■
Use the numeric keypad to manually enter the fax number. You can enter
up to 64 digits.
■
Press
Redial/Pause
number is displayed on the screen.
■
Press
Speed Dial/Group Dial/Backspace
to select a speed dial/group dial entry. Select
or type the number of the speed dial/group
dial entry you want to use, then press
You see the screen at right. Press
continue with your selection.
■
Press a one-touch dial button to select one of the first five speed dial/
group dial entries, then press
press to continue with your selection. (See page 23 for the paper insert.)
2
■
If you've connected a telephone to the
NX300/305 Series, dial the number from
the phone. You see the screen at right. Press
to confirm.
1
Note:
Don't hang up the phone until you begin transmitting the fax in step 5.
4. Press to change any of the following fax settings:
Menu
■
Resolution
■
Contrast
■
Send Fax Later
send another fax until the delayed fax has been sent or cancelled.)
■
Fax Mode
(to receive a fax from another fax machine to which you have dialed, such
as a fax information service).
Press when you're done selecting settings.
Menu
5. Press the x
B&W
Stop/Clear Settings
y
Note:
If the recipient's fax machine prints only in black and white, your fax is
automatically sent in black and white even if you select color.
to redial the last fax number you used. The last fax
to increase the scanning resolution of a faxed document.
to change the contrast of the faxed document.
to specify a different time to send your fax. (You cannot
to select
Sending
or x button to send your fax. To cancel faxing, press
Color
at any time.
.
OK
to enter another number or press
1
. Press to enter another number or
OK 1
(to send faxes as usual) or
to
2
Poll to Receive
Sending a Fax
21