Epson Stylus NX330 Quick Setup Instructions

Epson Stylus NX330
®
Small-in-One
™

Start Here

Read these instructions before using your product.
1

Unpack

Caution: Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all protective materials.
2

Turn on and adjust

1
Raise the paper support, then connect the power cord to
the back of the printer and to an electrical outlet.
Caution: Do not connect to your computer yet.
2
Raise the control panel, then press the
If you want to lower the control panel, squeeze the release
bar underneath.
Caution: Do not lower the control panel without first squeezing the
release bar underneath or you may damage the product.
*412183500*
*412183500*
3
To select English as your language, press OK.
If you want to change the language, press
then press
Note:
For more information, see the online User's Guide.
4
Note:
1
2
3
power button.
4

Select language

.
OK
You can change the language using the product's control panel.

Install ink cartridges

Don't load paper yet.
Lift up the scanner unit.
Shake the ink cartridges gently 4 or 5 times, then
unpack them.
Remove only the yellow tape from each cartridge.
Caution: Don't remove any other seals or the cartridges may leak.
Insert the cartridges in the holder for each color, and press
each cartridge down until it clicks.
or to select it,