Copying A Photo - Epson Stylus NX300 Series Quick Manual

■
Select
documents.
■
To change the copy quality, select
Best
■
To adjust the darkness or lightness of the copy, select
choose a higher (darker) or lower (lighter) setting.
Note:
Not all Paper Type, Paper Size, Layout, and Quality settings may be available
depending on the options you choose.
7. After you finish selecting your settings, press
settings.
8. Press the x
press y
Stop/Clear Settings

Copying a Photo

You can copy a photo onto 4 × 6-inch, 5 × 7-inch, or letter-size Epson photo
paper (various types available—see page 6) for instant photo reprints.
1. Press the P
2. Load Epson photo paper in the sheet feeder (see page 5).
3. Place your photo on the scanner glass (see page 8).
4. Press the
5. Press u or d or use the numeric keypad to select the number of copies you
want (up to 99).
6. To change the layout, press
to select
Press u or d to select
small margin around the image or
way to the edge of the paper (slight cropping may occur).
Note:
To adjust the amount of image expansion when printing borderless photos, select
Expansion and choose Standard, Medium, or Minimum.
12
Copying a Document or Photo
and make sure
Paper Type
, or (for plain paper only).
Draft
or x
B&W Color
button to turn on the NX300/305 Series.
On
button to enter Copy mode.
Copy/Fax
, and press
Layout
With Border
Plain Paper
Quality
button to begin copying. To cancel copying,
.
, press u or d
Menu
.
OK
to leave a
Borderless
is selected for copying
and choose
Standard Quality
Copy Density
and then
OK Menu
to expand the image all the
,
and
to exit