Indicator
Monitor
No memory card.
This memory card
cannot be used.
Card may be
damaged.
Insert another card.
g
Memory card is
locked. Slide lock to
"write" position.
Not available if
Eye-Fi card is locked.
This card is not
formatted.
Format the card.
Clock has been reset
Failed to update
flash unit firmware.
Flash cannot be
used.
Contact a Nikon-
authorized service
representative.
Unable to start live
view. Please wait.
n
324
Control
panel
Problem
Camera cannot detect
S
memory card.
• Error accessing
memory card.
W,
O
(flashes)
• Unable to create new
folder.
W,
Camera can not control
O
Eye-Fi card.
(flashes)
W,
Memory card is locked
X
(write protected).
(flashes)
W,
Eye-Fi card is locked
O
(write protected).
(flashes)
Memory card has not
[C]
been formatted for use in
(flashes)
camera.
—
Camera clock is not set. Set camera clock.
Firmware for flash unit
—
mounted on camera was
not updated correctly.
The internal temperature
—
of the camera is high.
Solution
Turn camera off and confirm
that card is correctly inserted.
• Use Nikon-approved card.
• Check that contacts are
clean. If card is damaged,
contact retailer or Nikon-
authorized service
representative.
• Delete files or insert new
memory card after copying
important images to
computer or other device.
• Check that Eye-Fi card
firmware is up to date.
• Copy files on Eye-Fi card to
a computer or other device
and format card, or insert
new card.
Slide card write-protect
switch to "write" position.
Format memory card or insert
new memory card.
Contact a Nikon-authorized
service representative.
Wait for the internal circuits
to cool before resuming live
view or movie recording.
0
29
334
—
29, 189
260
29, 31,
193
32
29, 31
27, 253
—
64