Clean At Startup/Shutdown - Nikon D610 User Manual

"Clean at Startup/Shutdown"

Choose from the following options:
Option
5 Clean at startup
Clean at
6
shutdown
Clean at startup &
7
shutdown
Cleaning off
1
Select Clean at startup/shutdown.
Display the Clean image sensor menu as
described in Step 2 on the previous page.
Highlight Clean at startup/shutdown and
press 2.
2
Select an option.
Highlight an option and press J.
D
Image Sensor Cleaning
Using camera controls during startup interrupts image sensor cleaning. Image sensor
cleaning may not be performed at startup if the flash is charging.
Cleaning is performed by vibrating the low-pass filter. If dust can not be fully removed using
the options in the Clean image sensor menu, clean the image sensor manually (0 303) or
consult a Nikon-authorized service representative.
If image sensor cleaning is performed several times in succession, image sensor cleaning
n
may be temporarily disabled to protect the camera's internal circuitry. Cleaning can be
performed again after a short wait.
302
The image sensor is automatically cleaned each time the camera is
turned on.
The image sensor is automatically cleaned during shutdown each time
the camera is turned off.
The image sensor is cleaned automatically at startup and at shutdown.
Automatic image sensor cleaning off.
Description