Using The Projector Keypad And Remote Control; Keypad Or Remote Control - IBM ILM300 User Manual

The projector is equipped with a self-locking, quick-release elevator foot and button. To raise the
projector:
1. Press and hold the elevator button 1 .
2. Raise the projector to the height that you want, then release the button to lock the elevator foot 2
into position.

Using the projector keypad and remote control

On the projector keypad, at left below, and the remote control, at right below, use the Menu button to
display the on-screen menus. Use the Select button on the projector keypad or the Computer and Video
buttons on the remote, at right below, to choose between devices attached to the projector. See "Using the
on-screen menus" on page 12 for details.
Keystone
Lamp
Volume
Power
Source/
Select
Menu

Keypad or remote control

When you have more than one image source connected to the projector, select between them by
v pressing the Select button on the keypad
v pressing the Computer or Video button on the remote control
v using the SourceSearch feature in the on-screen menus to automatically detect the kind of source
attached. See "SourceSearch on page 18.
Note: If the SourceSearch feature is not activated and you have multiple devices attached to the projector,
you might need to press the Select button more than once to find the active source. If you are
using the Select button, sources rotate in this order: data analog, data digital, S-video, and
composite video.
10
IBM iLM300 MicroPortable Projector: User's Guide
LASER
APERTURE
Power
*
Volume Laser Menu
!
Effect Computer Video
ON
OFF
L R