GE DNCD450 Installation Manual

Vision-impaired washer/dryer kit for washer wncd2050 and dryer dncd450

Download this manual

Parts Included

• Washer and Dryer Overlays

• Braille Reference Keys (2 washer, 2 dryer)

• Use and Care Audio Tape

Tools Needed

• Tape-tipped

putty knife (optional)

Braille Reference Keys

The Braille reference

keys included

in the kit explain

the operation

of the washer and dryer. Place the Left

key on the left side and the Rightkey on the right

side of the control panel.

NOTE: Make sure the protective

film is removed

from the washer or dryer control panel before

applying the reference keys.

Removing the Old Button Overlay

1. Unplug the washer or dryer.

2. Carefully peel the old button overlay from the

control panel, using a tape-tipped

putty knife if

necessary. Make sure that excess adhesive is

removed from the control panel. Keep the old

overlay handy as a reference.

Printed in the United States

175D1807P392 49-90129 02-02JR

Page 1 Parts Included Removing the Old Button Overlay • Washer and Dryer Overlays 1. Unplug the washer or dryer. • Braille Reference Keys (2 washer, 2 dryer) 2. Carefully peel the old button overlay from the control panel, using a tape-tipped putty knife if •...
Page 2 Applying the Braille Overlay 1. Plug the washer or dryer back in. 2. For washers: Using the old overlay as a reference, press and hold the White Cottons button in the upper left corner and the Startbutton in the upper right corner of the control panel.

Wncd2050