Table of Contents
Advertisement
COPYRIGHT © © © © 2012 ENTONE, INC. ALL RIGHTS RESERVED
6. Manually Program Additional Devices
Perform the following steps to program the TV and AUX device:
1.
Locate the device code for your desired device in the device code table provided in the Appendix. If
you could not find the device code for your device or it does not work after trying the listed device
codes for your device brand, then you can go to the next section to try the auto-search procedures.
2.
Turn on your device and with media inserted (if applicable).
3.
On the remote control, press a device mode key for 5 seconds (i.e., "TV" or "AUX"). The device
mode key will light up.
NOTE: Use the "AUX" mode key to program control of VCR, DVD player, cable box, satellite set-
top-box and audio device.
4.
Enter the four-digit device code for you device. If you perform this procedure correctly, the selected
device mode key backlight will blink twice. NOTE: If you enter an invalid device code, the selected
device mode key will fast blink 7 times. Device program mode will be terminated.
5.
Aim the remote control at your device and press the "POWER" once. The device should be turned
off. If it does not respond, repeat the above steps.
7. Auto-Scan (Program Additional Devices)
If your device does not respond to the remote control after trying all devices codes listed for you brand,
or if your brand is not listed at all, try searching for your device code as follows:
1.
Power on the device and on the remote control, press a device mode key (i.e., "TV" or "AUX") and
hold for 5s. The device mode key will light up.
NOTE: Use the "AUX" mode key to program control of VCR, DVD player, cable box, satellite set-
top-box and audio device.
2.
Press the "POWER" key once and aim your new remote at the device.
3.
Press either the "CH UP" key or "CH DOWN" key to do device auto-scan.
4.
In this search mode, the remote control will send IR codes from the library in 5 second intervals.
The device key will be on and blink every 5 seconds while in the device scan mode.
5.
If the device turns off, a working code has been found. Press "OK" once to lock in the code. The
selected mode key will blink twice.
6.
If all code sets of that device are exhausted in the search and the "OK" is not pressed, the selected
device key will fast blink 7 times and the search mode will be terminated.
Your Universal Remote Control (URC) can control many brands and models of television, VCR, DVD
and other types of audio-visual equipment. The following pages list device codes for many categories
and brands of equipment. Many brands list more than one code, and you may need to test several codes
to find the best match for your equipment. If you cannot locate your brand, or none of the listed device
codes works, then you may still use the auto-scan feature to try to locate a suitable device code.
TV - Digital TV
Samsung 0163
Zenith
0165
TV - HD Plasma Display
RCA
0242, 0262
TV - HDTV
Apex
0083
Daewoo
0267, 0333, 0419,
0336
Hitachi
0091
Kamai Quick Reference (P/N 95-88xxxx-00)
.
Appendix - Device Codes
ILO
0094
JVC
0071
Mitsubishi 0111, 0238, 0013,
0147
Panasonic 0311, 0012
Philips
0192, 0303, 0000,
0244
Proscan
0138
0138, 0158, 0140,
RCA
0262
v1.1
Sampo
0055
Sharp
0198
Sony
0236, 0035, 0043,
0231
Zenith
0103, 0105
TV - HDTV Monitor
Brillian
0184
Panasonic 0161
Philips
0217
RCA
0282
3
Advertisement
Table of Contents
