Related Manuals for Intellinet PowerLine HD Ethernet Adapter 503839
Summary of Contents for Intellinet PowerLine HD Ethernet Adapter 503839
- Page 1 PowerLine etHernet ADAPter user mAnuAL Model 503839* * This manual can also be used for the PowerLine HD Ethernet Adapter Starter Kit, Model 503808 INT-503839-UM-0608-01...
- Page 2 Thank you for purchasing the INTellINeT NeTWoRK SolUTIoNS ™ Powerline Hd ethernet Adapter, Model 503839.* This easy-to-install device allows you to create a high-speed network for the computers in your home or office by simply plugging the adapter(s) into any electrical outlet. You immediately create a network using the existing AC power lines and can extend your home network into areas a wireless signal cannot reach.
-
Page 3: Hardware Installation
HArDwAre instALLAtion The Powerline Hd ethernet Adapter is LED Indicators Quick Setup Button designed for quick, easy installation. 10/100M Fast Ethernet Port Using the included Ethernet cable, connect the adapter to a network router, switch or other Ethernet-enabled device. NOTE: The ethernet port on the adapter supports 10/100M Auto-MDI/MDIX, so you can use a straight-through or a crossover ethernet cable when connecting to another Ethernet-enabled device. -
Page 4: Configuration Utility Installation
conFiGurAtion utiLitY instALLAtion The HomePlug AV Utility (for Windows 2000, XP or Vista) enables users to identify Powerline devices on the Powerline network. It also measures data rate performance, ensures privacy and performs diagnostics by setting user-defined, secure PowerLine networks. To begin installation, insert the included setup Cd into your Cd-RoM drive to... -
Page 5: Network Information
Network Information This screen presents a list of all devices on the Powerline network. devices that are active on the current logical network will show a transfer rate and receiver rate. Quality of Service (QoS) requirements are different for various data types, such as streaming video or music, voice and raw data. -
Page 6: Device Selection
Device Selection From the drop-down list, select the device you want to configure. List View The QoS tab includes two list views to provide simple channel access priority (CAP) classification for individual MAC addresses and IP ports. There is a collective limit of eight across both lists. NOTE: No delimiters, colons or dashes are allowed in the MAC address format. - Page 7 • Multicast/Broadcast: sets the default CAP 1 for multicast frames not in a snooped group and for broadcast frames. • Unicast (default CAP 1): sets the default channel access priority for unicast frames not matching any other classification or mapping. Reset to default Press “Reset to default”...
- Page 8 Upgrade Device Selection From drop-down list, select the device you want to configure. Reboot Device Press “Reboot Device” to reset the node, which will restore the initial factory configuration. Firmware Upgrade Click “Firmware Upgrade,” then locate the two firmware files (PIB file *.pib and firmware file *.nvm).
-
Page 9: Troubleshooting
troubLesHootinG When you initially plug in and turn on the power to a Powerline adapter, the Power led should light. After approximately 10 seconds, the PowerLine LED should also light, and the Ethernet LED should blink. If the Power LED fails to light: •... -
Page 10: Specifications
sPeciFicAtions Standards • IEEE 802.3 10Base-T; IEEE 802.3u 100Base-TX; HomePlug AV General • one 10/100 RJ-5 port • one AC power line port • Chipset: Intellon INT6300 • Link speed: up to 200 Mbps • 128-bit AES Link Encryption with key management for secure power line communications •... - Page 12 INTELLINET NETWORK SOLUTIONS ™ offers a complete line of active and passive networking products. Ask your local computer dealer for more information or visit www.intellinet-network.com Copyright © INTELLINET NETWORK SOLUTIONS All products mentioned are trademarks or registered trademarks of their respective owners.