Kodak K3ARDC Quick Manual

K3ARDC Ni-MH Rechargeable Battery
System:
Designation:

Nominal Voltage:

Nominal Capacity:
Minimum Capacity:
Charging Condition:
Max. Discharge:
Temperature Ranges:
Operating
Storage
Charging Approx.
Weight:
Terminals:
Jacket:
Internal Impedance:
Charging Cycles:
Note:
1) No added Mercury / 99.9999% Mercury Free — 2) No added Lead /99.999% Lead Free
3) No added Cadmium / 99.9999% Cadmium Free —4) No added PFOS (Perfluorooctane sulfonates)
5) This battery complies with ANSI C18, IEC 60086, and EU Directive 2006/66/EC, 2006/122/EC
6) Batteries are NOT subject to European RoHS regulations
7) MSDS sheets are available on the Kodak website
8) Operating at extreme temperature will significantly affect service and cycle life
9) For best performance after a long period of non-use, charge and discharge the battery several times
10.5+0/-0.5
Dimensions are in millimeters and include label.
Nickel-Metal Hydride battery
ANSI 1.2H1, IEC HR03
1.2 Volts
900 mAh
800 mAh
90 mA for 16h
1.6 A Continuous to 1.0 V
2.4 A Intermittent
0°C to +50°C
-20°C to +30°C
0°C to +40°C
12.5 grams
Flat Contacts
PVC Label
0.020 Ohms (typical)
Up to 500.
Maximum life is achieved by shallow discharge and
charge conditions.
The Data in this publication represents product tested under the conditions specified. They
do not represent standards or specifications which must be met by Eastman Kodak Company.
Company reserves the right to change and improve product characteristics at any time.
For more information, contact Eastman Kodak Company, 343 State Street, Rochester NY
14650-0811, Phone 1-800-242-2424
© Eastman Kodak Company, 2009
Effective: June 10, 2009
44.0+0/-1.0
1.4 +/- 0.4
3.8+0/-0.5
www.kodak.com/go/batteries
Kodak is a trademark.
K3ARDC-900