Service Manual
MICROCONTROLLER
1
.
Remove the UPPER HOUSING. See page 4-1.
2
.
Remove the CENTER HOUSING. See page 4-4.
3
.
Remove the SCREW and the COVER.
4
.
Use a PLCC EXTRACTOR TOOL (TL 4430) to remove the MICROCONTROLLER from the
MASTER PCB.
5
.
When assembling note the beveled edge of the MICROCONTROLLER and the PLCC/PIN-GRID
SOCKET. Install these edges together.
COVER
03/98
SCREW
The MICROCONTROLLER is installed in a PLCC-Socket.
MICROCONTROLLER
NOTE
4-24
SM2547-1
PLCC EXTRACTOR
TOOL (TL 4430)
Kodak AG, Stuttgart