Electrical Information - Pace sky+ User Manual

Electrical information

Mains plug and its fuse
The supplied mains plug may be a non-rewireable type or a rewireable type. Both types contain
an approved 3A fuse. If you need to replace the fuse, use an ASTA- or BSI-approved BS 1362 fuse,
rated at 3A and marked with either of these symbols.
Non-rewireable plugs have the fuse beneath a fuse cover on the plug face. Use a screwdriver to
lever off the fuse cover, replace the fuse with a new one and refi t its cover. Never use a plug if its
fuse cover is missing.
Rewireable plugs have the fuse inside. Use a screwdriver to remove the plug's back cover, then
lever out the fuse and replace it with a new one. Replace the plug's back cover.
If the supplied mains plug is not suitable for your mains socket-outlet, remove its fuse and
then cut the plug off the lead. Destroy the severed plug immediately to avoid the shock
hazard which would exist if this were to be plugged into a mains socket. Do not attempt to
repair or modify the mains lead or plug. Fit an appropriate mains plug on the lead. If this
plug contains a fuse, it should be as described above. If you are using a non-fused plug, an
external fuse must not exceed 5A.
Connecting to the mains supply
Your Sky + box operates with 230V AC, 50 Hz mains supply. Do not connect it to a DC power supply.
On some models, the supplied mains lead has a 2-way connector at one end and a mains plug at the other. Insert the 2-way connector
into your Sky + box before you insert the plug into the mains supply.
The only way to disconnect your Sky + box from the mains is to take the plug out of the socket. Your Sky + box must therefore be
installed near the mains socket outlet, which should be easily accessible.
If you are in any doubt about anything relating to the mains supply, consult a competent electrician.
AM
E
N
L
use correct fuse
TV TO FIT YOUR LIFE 5