Tech 21 Landmark 60 Owner's Manual

Enlarged version

Fill in the following information for future reference:

Serial Number

______________________________

Dealer's Name ______________________________

Date Purchased ______________________________

Tel: 973-777-6996

E-Mail: info@tech21nyc.com

Website: www.tech21nyc.com

Table of Contents

Need help?

Do you have a question about the Landmark 60 and is the answer not in the manual?

Page 1 Fill in the following information for future reference: Serial Number ______________________________ Dealer’s Name ______________________________ Date Purchased ______________________________ Tel: 973-777-6996 E-Mail: info@tech21nyc.com Website: www.tech21nyc.com © 2002 Tech 21, Inc.
Page 2 ANDMARK 60, AN OVERVIEW Tech 21, Inc., was formed by a guitarist possessing the unusual combination Tech 21’s SansAmp Bass DI direct box, which had internal controls to “set of a trained ear and electronics expertise. In 1989, B. Andrew Barta incorpo- and forget,”...
Page 3: Important Safety Instructions
12. This product should be used only with a cart or stand that is recommended by 3. Be sure the Level control on the Landmark 60 is down and then turn on the amp. the manufacturer. When a cart is used, use caution when moving the cart/product 4.
Page 4: Front Panel
Connects or disconnects the ground circuits between the XLR Direct Out of the unplug your bass. Landmark 60 and the mixer. We recommend starting with the ground lifted. If neces- sary, connect the ground by pushing the button in.
Page 5 The Effect Loop allows you to connect external effects between the pre-amp and Note: With on-going product development and improvements, specifications and/or power amp section of the Landmark 60. Connect the input of your effect to Send; out- the cosmetic appearance of this unit may change without prior notice.