Manual Installation Of Products On A Workstation - Autodesk 12909-091452-9750 - Map 3D 2006 Student Edition Installation Manual

10. Manual Installation of Products on a Workstation

Some products require manual installation and activation for each product on each
computer. See the Product Installation Information table on page 14 for more information.
When you install products manually, you do not use the Deployment wizard or the Network
License Manager.
To install products manually
1. Close all applications and restart the computer.
2. Follow the mandatory order of product installation, shown in the Product Installation
Information table. You must use administrative permissions while you install each
product.
3. Insert the product CD into a computer's CD-ROM drive.
4. In the product's Media Browser, on the Install tab, click Stand-Alone Installation.
5. When a serial number is required, enter the same Design Institute serial number for
each product that you install. This serial number is on the Design Institute shipping box.
Note: After installation, run each product to register and activate it. See the next section
for details about activation.
Autodesk Design Institute 7 Installation Guide
29