Sony LMD1751WCC Brochure page 10

PVM Series
Quick Response with Virtually
Blur-free Motion
Because the OLED electroluminescent layer inherently
responds to any electrical current input, it emits light
immediately. By this mechanism, excellent quick response
characteristics can be achieved on fast-motion images.
This effi cient virtually blur-free, fast response benefi ts a variety
of applications and scenes, e.g., in sports broadcasting,
monitoring of camera panning, and text scrolling.
Superb Uniformity
The PVM-2541 and PVM-1741 monitors incorporate a newly
developed OLED process to bring out the full performance of
the Sony OLED panels.
This OLED processor offers superb uniformity across all signal
levels at every point of the screen. The OLED panel uniformity
is precisely measured and corrected using a sophisticated
RGB LUT (look-up table) adjustment system.
Waveform Monitor, Audio Level
Meter, and Time Code Display
Input signal waveform with a 2-channel audio level meter can
be displayed on screen. When an SDI interface is connected,
the embedded audio level can be displayed on screen with
an 8-channel audio level meter. Time code embedded on SDI
signals can be displayed on screen. Users can select either
LTC or VITC.
* The Audio Level Meter function works only when receiving SDI-embedded
audio signals.
The waveform monitor,
2-channel audio level meter,
and time code display*
10
The 8-channel audio level
meter*
* Simulated images
I/P Mode Selection
The PVM-2541 and PVM-1741 monitors provide four I/P modes
so that users can select the most suitable mode for each
purpose:
INTER-FIELD:
This mode interpolates images between fi elds. This is used
for picture quality precedence (e.g., to reduce the jagged
effect on moving pictures).
INTRA-FIELD:
This mode interpolates images within the fi eld, and delivers
naturally reproduced images and quick picture processing.
This mode is available for 1920 x 1080 SDI signal input.
FIELD MERGE:
This mode combines lines alternately in odd and even
fi elds, regardless of picture movements. This is used for PsF
(Progressive Segmented Frame) processing and still image
monitoring.
LINE DOUBLER:
This mode interpolates by repeating each line. This is
used for editing and monitoring fast-moving images, and
checking line fl icker. The minimum processing time is less
than one fi eld (0.5 frames).
Interlaced
signal
I/P conversion by
"LINE DOUBLER" mode
(No need to wait for
the next eld to come)
After I/P
conversion
LINE DOUBLER I/P mode image
Signal
Processing
period is less
than 1 eld.