Download Print this page

Specifications; Optional Accessories - Sony LMD-1751W Brochure

Professional lcd monitor
Hide thumbs Also See for LMD-1751W:

Advertisement

SPECIFICATIONS

Picture Performance
Type
Resolution (pixels)
Picture Size (H x W)
(Viewable area)
(Diagonal)
Aspect
Colors
Viewing Angle
Input
Standard
Composite
Y/C
RGB, Component
External Sync
Audio
HD15
DVI-D
Parallel remote
Serial remote (LAN)
DC in
Optional
Option input slot
Output
Standard
Composite
Y/C
RGB, Component
External Sync
Audo monitor out
Speaker (Built-in)
General
Power Requirement
Power Consumptio
Operating Temperature
Recommended Operation Temperature 68°F to 86°F (20°C to 30°C)
Operating Humidity
Storage & Transport Temperature
Storage & Transport Humidity
Operating/Storage/Trans. Pressure
Dimensions (W x H x D)
without stand
with optional stand
Display Stand (W x H x D)
SU-561(Option)
Weight
without stand and board
with optional stand and
boards
Supplied Accessories
Sony Electronics Inc.
1 Sony Drive
Park Ridge, NJ 07656
sony.com/professional
DI-0194 (MK10641V1)
a-Si TFT Active Matrix LCD
1280 x 768
5
3
Approx. 14
/
x 8
/
inches
8
4
(Approx. 369.6 x 221.8 mm)
Approx. 17 inches (431.1 mm)
15:9
Approx 16,770,000 colors
85°/85°/85°/85°
(typical) (up/down/left/right contrast>10:1)
BNC (x1), 1.0 Vp-p ±3dB sync negative
Mini DIN 4-pin (x1)
Y: 1.0 Vp-p ± 3dB sync negative,
C: 0.286 Vp-p ± 3dB (NTSC burst signal level),
0.3 Vp-p ± 3dB (PAL burst signal level)
BNC (x3)
RGB : 0.7 Vp-p ± 3dB (Sync On Green, 0.3 Vp-p sync negative)
Component : 0.7 Vp-p ± 3dB
(75% chrominance standard color bar signal)
BNC (x1)
0.3 to 4.0 Vp-p ± bipolarity ternary or negative polarity binary
Phono jack (x2) (L, R) -5 dBu 47 kilo ohms or higher
D-sub 15-pin (x1),
R/G/B: 0.7 Vp-p sync positive
(Sync On Green, 0.3 Vp-p sync negative)
Sync : Total level
(polarity free, H/V separate and composite sync)
Plug & Play function : corresponds to DDC-2B
TMDS single link
Modular connector 8-pin (x1)
(pin assignment at users' allocation)
D-sub 9-pin (RS-232C) (x1),
RJ-45 modular connector (ETHERNET) (x1)
(10BASE-T/100BASE-TX)
XLR type 4-pin (x1) DC 12 V
(output impedance 0.05 ohms or less)
2 slots (for HD-SDI, SDI capability and extra analog I/O's)
BNC (x1), Loop-through, with 75 ohms automatic termination
Mini DIN 4-pin (x1) Loop-through,
with 75 ohms automatic termination
BNC (x3), Loop-through,
with with 75 ohms automatic termination
BNC (x1), Loop-through, with 75 ohms automatic termination
Phono jack (x2) (L, R)
1 W + 1 W (stereo)
AC 100 V to 240 V 50/60 Hz 0.8A to 0.4 A, DC 12 V, 5.7 A
Maximum Approx. 77 W (with 2 x BKM-229X)
32°F to 95°F (0°C to 35°C)
30% to 85% (No condensation)
-4°F to +140°F (-20°C to +60°C)
0% to 90%
700 hPa to 1060 hPa
3
1
1
17
/
x 11
/
x 4
/
inches (439.5 x 284 x 105.0 mm)
8
4
4
5
3
3
12
/
x 14
/
x 10
/
inches (439.5 x 385.7 x 269.9 mm)
8
8
4
5
3
3
12
/
x 14
/
x 10
/
inches (320.0 x 364.0 x 269.9 mm)
8
8
4
Approx. 13 lb 14 oz (6.3 kg)
Approx. 19 lb 6 oz (8.8 kg) with BKM-229X (x2)
AC power cord (1), AC plug holder (1),
Operating Instructions (1), CD-ROM (1),
Using the CD-ROM Manual (1), Warranty book (1)

OPTIONAL Accessories

BKM-250TG
BKM-244CC
3G/HD/SD-SDI
HD/SD-SDI Closed
Input Adaptor
Caption Adaptor
BKM-229X
BKM-227W
Analog Component
NTSC/PAL Input Adaptor
Adaptor
MB-530
SU-561
Mounting Bracket
Monitor Stand
DIMENSIONS
3
17
/
(439.5)
8
4 (100.0)
3 (75.0)
Reproduction in whole or in part without permission is prohibited.
Features and specifications are subject to change without notice.
All non-metric weights and measurements are approximate.
Sony, "make.believe", ChromaTRU, LUMA and Trinitron are trademarks of Sony.
All other trademarks are the property of their respective owners.
BKM-243HS
HD/SD-SDI Input Adaptor
BKM-220D
SD-SDI 4:2:2 Input Adaptor
5°*
10°*
*Tilt angle
1
4
/
(105.0)
4
10
3
/
(269.9)
4
With optional SU-561
Monitor Stand
Unit: inches (mm)
©2010 Sony Electronics. All rights reserved.
Images on monitors are simulated.
Printed in USA (7/10)

Advertisement

loading

This manual is also suitable for:

Lmd1751whdLmd1751wcc