Fitting The Carrying Cord; Inserting And Changing The Battery - Leica Rangemaster CRF 1200 Instructions Manual

Fitting the carrying cord

Push the smaller loop through the eyelet (2) on
the housing of the Leica Rangemaster CRF.
Then, thread the longer loop through the smaller
loop and pull it tight so that the carrying cord is
securely attached to the eyelet.

Inserting and changing the battery

The Leica Rangemaster CRF is supplied with
power by one 3 Volt lithium cell (e.g. Duracell
DL CR 2, Ucar CR 2, Varta CR 2, or other CR 2
types).
1. Open the battery compartment (7) cover (6)
by turning it anticlockwise.
2. Insert the battery with its positive contact
facing forwards (as marked in the battery
compartment).
3. Close the cover again by turning it clockwise.
14