Advertisement
Quick Links
Advertisement
Related Manuals for Crate XK100
Summary of Contents for Crate XK100
- Page 1 XK100 Keyboard Amplifier User’s Guide...
-
Page 2: Declaration Of Conformity
XK100 Keyboard Amplifier Declaration of Conformity Manufacturer’s Name: SLM Electronics Corporate Headquarters: 1901 Congressional Drive, St. Louis, Missouri 63146 Primary Production Facility: 700 Hwy 202 W, Yellville, Arkansas, 72687 Product Type: Audio Amplifier Products meet the regulations for compliance marking under: ETL standards UL6500, UL60065, or UL813 CSA standards E60065 or C22.2 No.1-M90... - Page 3 Send and Return jacks, and headphones may be connected for personal monitoring as well as private practice sessions. The XK100 ’s angled cabinet allows you to use it as an upward projecting floor monitor or stand it upright like a conventional amplifier.
- Page 4 XK100 Keyboard Amplifier 1. MIC IN: Use this balanced XLR jack to connect a low impedance balanced microphone signal to Channel 1 of the amplifier by means of a shielded microphone cable. 2. LINE IN: Use this balanced 1/4” jack to connect a high impedance microphone or other line level signal to Channel 1 of the amplifier by means of a shielded microphone or instrument cable.
- Page 5 XK100 Keyboard Amplifier 9. INPUT: Use this 1/4” jack to connect a keyboard or other line level signal to the corresponding chan- nel by means of a shielded instrument cable. 10. EQUALIZATION: Use this five-band graphic equalizer to shape the output of the amplifier to best suit your tastes and to compensate for room acoustics.
- Page 6 XK100 Keyboard Amplifier 19. PRE AMP OUT: Use this jack to send a high impedance unbalanced signal from the amplifier to another amplifier or recording device by means of a shielded signal cable. 20. POWER AMP IN: Use this jack to connect a line level signal directly into the internal power amp circuit.
-
Page 7: System Block Diagram
XK100 Keyboard Amplifier System Block Diagram: PEAK CHANNEL 1 TONES LINE PATCH BAY LEVEL SEND RETURN REV/ EFFECT LOW HIGH RETURN PEAK REVERB CHANNEL 2 RETURN INPUT LEVEL REV/ EQUALIZATION PEAK CHANNEL 3 MASTER INPUT LEVEL REV/ BAL. LINE PEAK BAL. - Page 8 1 volt RMS Limiter Range 20dB, maximum distortion 1% Speaker Size and Rating 15” Crate Custom Design w/2.5” voice coil and 56 oz. magnet 2 HF drivers Cabinet Size and Weight 24.5” H x 21” W x 18.25” D, 69 lbs.