Overseas Mode; Checking And Cancelling Waiting Jobs; Sending A Fax Manually; Out Of Memory Message - Brother VERSION 0 MFC-290C User Manual

Overseas Mode

If you are having difficulty sending a fax
overseas due to possible interference on the
telephone line, we recommend that you turn
on the Overseas mode. After you send a fax
using this feature, the feature will turn itself
off.
a
Make sure you are in Fax mode
b
Load your document.
c
Press Menu, 2, 2, 4.
d
Press a or b to choose On (or Off).
Press OK.
Checking and cancelling
waiting jobs
You can check which jobs are still waiting in
the memory to be sent and cancel a job. (If
there are no jobs, the LCD shows
No Jobs Waiting.)
a
Press Menu, 2, 4.
Any waiting jobs appear on the LCD.
b
Do one of the following:
Press a or b to scroll through the jobs
and choose the job you want to
cancel.
Press OK to choose a job, and then
press 1 to cancel it.
Press 2 to exit without cancelling.
c
When you have finished, press
Stop/Exit.

Sending a fax manually

5
Manual transmission lets you hear the
dialling, ringing and fax-receiving tones while
sending a fax.
a
Make sure you are in Fax mode
b
Load your document.
.
c
Pick up the handset of an external
telephone and listen for a dial tone.
d
Dial the fax number you want to call.
e
When you hear the fax tone, press
Mono Start or Colour Start.
If you load the document on the
scanner glass, press 1 to send the
fax.
5
1.Send 2.Receive
f
Replace the handset.

Out of Memory message

If you get an Out of Memory message
while scanning the first page of a fax, press
Stop/Exit to cancel the fax.
If you get an Out of Memory message
while scanning a subsequent page, you will
have the option to press Mono Start or
Colour Start to send the pages scanned so
far, or to press Stop/Exit to cancel the
operation.
Note
If you do not want to delete your stored
faxes to clear the memory, you can
change the setting to send the fax in real
time. (See Real time transmission
on page 30.)
Sending a Fax
5
.
5
5
31