Brewing Coffee Grounds Or Soft Pods - Hamilton Beach 49983C Use & Care Manual

How to Use Single-Serve Side –

Brewing Coffee Grounds or Soft Pods

w WARNING
Burn Hazard.
To avoid contact with hot coffee or water:
• Do not use more than 14 oz. (410 ml) of water for ground coffee or Melitta
cause an error message to appear in the display, along with a long beep. Place carafe on warming plate. Turn brew selector dial to Carafe
( ) and push BREW NOW button to remove water. Wait for 3 beeps and blue power light to turn off. Restart the Single-Serve process.
• Fill reservoir with cup or travel mug of water into which the coffee will be brewed.
• Fully insert cup or travel mug under brew basket.
• Remove K-Cup * pack holder before adding coffee grounds to brew basket.
®
This unit can be used with
Melitta ® § soft pods, available
in the coffee aisle of your local
grocery store.
NOTE: It can take up to 2
minutes before brewed coffee
starts dispensing into your cup
or travel mug.
840219700 ENv10.indd 7 840219700 ENv10.indd 7
1
Plug in coffeemaker. Rotate brew
selector dial to the right to select
Single-Serve ( ). Press BREW
OPTIONS button to select GROUND
mode.
Melitta is a registered trademark of Melitta Haushaltsprodukte GmbH & CoKG. Use of the Melitta trademark
§
does not imply any affiliation with or endorsement by Melitta Haushaltsprodukte GmbH & CoKG.
§
® Pods. Adding more than 14 oz. of water to the water reservoir will
2
To remove K-Cup ® * pack holder,
grasp the K-Cup ® * pack holder
cup; slide towards the back and
then lift out.
CAUTION! Cut Hazard: Removable
K-Cup ® * pack holder has a sharp
blade. Handle with care.
3
Add ground coffee (3 Tablespoons
[45 ml] is the MAX amount of
ground coffee for brew basket)
or soft pod to brew basket.
WARNING! Burn Hazard: To
avoid overflow, keep ground
coffee below MAX fill line.
4/22/13 2:18 PM 4/22/13 2:18 PM
7