Insignia NS-BIPCD03 User Manual page 8

3 Close the battery compartment until it clicks into place.
Connecting the AC adapter
To use the AC power adapter:
1 Make sure that your local AC power source matches the voltage shown
on the plate located on the AC power adapter. If it does not, do not use
that power source.
2 Insert the small connector at the end of the AC power adapter cable
into the DC IN jack on the back of your boombox.
3 Plug the AC power adapter into a wall power outlet.
8
NS-BIPCD03 Boombox with Dock for iPhone 5
Note
The AC power adapter must be disconnected from the DC IN jack
on the back of your boombox in order for your boombox to
operate on battery power.
When the battery indicator
need to replace the batteries.
Caution
Follow these precautions when using batteries in this device:
• Use only the size and type of batteries specified.
• Make sure that you follow the correct polarity as indicated
in the battery compartment when installing batteries.
Reversed batteries may cause damage to your boombox.
• Do not mix different types of batteries together (for
example, alkaline, rechargeable, and carbon zinc), or
semi-used batteries with fresh ones.
• If your boombox is not to be used for a long period of time,
remove the batteries to prevent damage or injury from
possible battery leakage.
• Do not try to recharge batteries not intended to be
recharged, because they can overheat and rupture.
(Follow battery manufacturers directions.).
• Do not throw batteries into a fire. Dispose of used batteries
as hazardous waste.
Caution
To protect your boombox during thunderstorms, unplug the AC
power adapter from the AC power outlet.
Note
Only use the supplied AC power adapter, which has the
following specifications: DC 9V 2.2A
Unplug both the DC plug and the adapter when not in use.
The batteries are automatically bypassed when the AC power
adapter is used.
www.insigniaproducts.com
appears in the display, you