Harbor Freight Tools BUCK HORN WAGON WOODEN MODEL 9141 Assembly Instructions page 4

2. Smooth the edges of the punched out pieces with sand paper. Begin putting together
by using the drawing below as a guide. Use glue on the portions shown in "black".
See arrows in Figure D.
3. Use Scotch Tape
4. A rubber band can be used to hold assembled pieces until glue has dried. Clean the
edges or surfaces of the Wagon with a wet cloth to remove wet glue or unsightly
smudges.
5. Rod "A" passes through Wheels (#23, #24, #26 & #4) front and rear of wagon.
6. When assembly is completed, you can finish the Wagon with paint, colored
markers or crayons using your creativity.
#4
#19
#18
#23
#25
#25
SKU 90141
®
on the backside to hold round or non-flat pieces together.
#6
#5
#9
#24
"A"
Brass
Rod
#17
#7
#8
#23
#26
Figure C
PAGE 4
#2
#4
#3
#1
#22
#21
#11
#12
#13
#14
#15
#24
#26
#23
#16