Cautions And Warnings - Genz Benz EL DIABLO 100 COMBO Owner's Manual

Hide thumbs Also See for EL DIABLO 100 COMBO:
Table of Contents

Advertisement

FEATURES:
50/100 Watt Output Selection
Two Versatile Tube Channels
Five Button Footswitch Included
Three Effects Loops
Frequency Compensated D.I. Section
Accutronics® Long Pan Reverb
Our Unique Edge Lift Handles
Dual GBE 1240-V75 Loudspeakers
Front Ported Speaker enclosure
2" Removable Casters Included

CAUTIONS AND WARNINGS:

Tube amplifiers, especially high-powered tube amps, generate heat. Allow at least 4 inches (100mm)
of clearance at the back, top and front of the amplifier cabinet. Do not block ventilation vents and
keep clear of curtains and other flammable materials. Avoid contact with hot tubes.
Do not expose amplifier to moisture, rain, splashed water, beverages, etc.
Be sure that a speaker load is connected to the amplifier before applying power; otherwise damage to
the amplifier could result.
Be sure that the amplifier is properly grounded. Do not defeat the ground pin on the AC power input
plug. The ground is there to protect the user from the possibility of shock.
Be sure that the AC power (mains) voltage selector switch is configured for the proper voltage (115
volts or 230 volts) for the area you are located before connecting the amplifier to the power source.
In the event of a thunderstorm, remove the power plug from the wall socket to prevent damage due to
the possibility of lightening strikes.
Turn off power to the amplifier (or place in standby) when changing wiring connections to prevent
damage to speakers from possible (and unexpected) loud noises.
WARNING: This amplifier is capable of extreme high decibel output. Always protect your hearing.
Your hearing is an invaluable tool in appreciating the tone of EL DIABLO 100 Combo.
There are no user-serviceable parts inside the chassis.
personnel.
Always unplug the amp when changing the power or preamp tubes. Never touch the tubes if they are
still hot.
Always wait to move the amp after use until the tubes have cooled. This will prevent tube damage
and extend tube life. A few minutes should be sufficient.
While we have made every attempt to outline all general cautions, the ultimate responsibility for safe
operation of this or any amplifier product rests with the consumer.
practiced at all times when using the amplifier.
Six Triode Preamp Stages (3-12AX7's)
Four Power Tubes (w/ Ruby Tubes™ EL 34's)
Military Spec. Double-sided Glass Epoxy Circuit
Boards
All Custom Wound Transformers
Transformer Based Phase Inverter for Optimum
Power Tube Grid Drive
Heavy-duty Steel Chassis, Mounted within a
Sturdy Birch Plywood Case
Refer all service to qualified service
Common sense should be
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents