Whirlpool X2-30ES Instructions For Use Manual page 9

one seconds to 99 minutes and 99
seconds. If you are setting a time greater
than one minute, you must enter
numbers for both minutes and seconds.
For example, to set 20 minutes, enter
2,0,0,0.
3. If you want to set a power level other than
100% power, touch POWER, then use the
number pads to enter the power level. You
can set the power level from 1 to 9.
4. Touch START to start cooking.
USE THESE SINGLE DIGIT TO
REPRESENT POWER LEVELS
Number pad % of Power
9
8
7
6
5
4
3
2
1
B. Two-stage Cooking
Some recipes require different stages of
cooking at different temperatures.
1. SET STAGE 1:
Follow steps 1 and 2 in "One-stage
Cooking".
DO NOT TOUCH START PAD.
2. SET STAGE 2:
Touch MEMO pad then enter proper
cooking time and (lower) power level.
(Most 2-stage recipes use lower power for
second stage.)
3. Touch START pad.
NOTE:
·The respective lights will come on to
START DELAY
Suppose you want to set the oven to start-up at
2 o'clock.
Step : 1. Touch START DELAY pad.
90%
80%
NOTE:
70%
Be sure the time of day clock is set at the
60%
50%
correct time before programming START
40%
DELAY.
30%
20%
10%
EXPRESS
Use this feature to program the oven for 4
popular microwave timings.
With each touch of the EXPRESS pad you can
program the oven for :
The oven will operate at HIGH power (100%
power output) for EXPRESS cooking program.
Suppose you want to set the oven to cook for 1
8
indicate which stage the oven is operating
in. After total time has elapsed, 3 beeps
sound. After a cooking or defrosting
program has completed, the oven will
automatically continue to sound three
beeps every two minutes until the door is
opened or the STOP pad is touched.
2. Touch numeral pads 2.0.0.
3. Set the cooking programs.
4.Touch START pad.
15 seconds .........TOUCH ONCE
30 seconds..........TOUCH TWICE
1 minute..........TOUCH 3 TIMES
2 minutes.........TOUCH 4 TIMES