Table of Contents
Advertisement
START DELAY
Use to set the oven to start-up at a later time.
The start delay indicator will flicker when the
oven is in the start delay state. The clock must
be set before the start delay function can be
programmed.
CLOCK
Use to set the time of day or recall the time of
day. The time of day will be displayed at all
times except when the oven is operating. In the
event of a power failure or if the oven is
unplugged, the clock will have to be reset.
STOP
Touch to cancel the selected power level, cook
or defrost times that previously programmed.
But the time of day clock cannot be cancelled.
MEMO
When programming the oven to cook by time,
use the MEMO pad when setting both the 1st
and the 2nd cooking stage. The respective
OPERATION INSTRUCTIONS
BEEP DURING OVEN SETTINGS
Each time a pad is touched, a beep will sound
to acknowledge the touch.
SETTING THE CLOCK
1. Touch CLOCK pad.
2. Touch STOP pad.
3. Use the number pads to enter the
correct time. You must touch at least
three numbers to set the clock(one for
hour and two for minutes).
4. Touch CLOCK pad again.
NOTE:
lights will come on to indicate which stage the
oven is operating in.
TIMER
Use to set cooking time. Allows you to set up
to 99 minutes and 99 seconds.
EXPRESS
Use this feature to program the oven for 4
popular microwave timings. The oven will
operate at HIGH power (100% power output)
for EXPRESS cooking program.
START
Touch to start the cooking or defrosting
programs. The cooking indicator light and the
oven light will turn on and the cooling fan will
operate.
This is a 12-hour clock. When the oven was
plugged in, "1:01" should have appeared
in the display. To reset the time of day,
repeat the steps given above. You can
check the clock time while cooking is in
progress by touching the CLOCK pad.
SETTING COOKING TIMES AND
POWER LEVELS
A. One-stage Cooking
1. Touch TIMER pad.
2. Use the number pads to set a cooking
time. You can set a cooking time from
7
Hide quick links:
Advertisement
Table of Contents
