Hitachi 2.5 inch SATA Travelstar HTS543232L9A300 Oem Specification page 133

Security Level Zero indicates High level, one indicates Maximum level. If the host sets High level and the
password is forgotten, then the Master Password can be used to unlock the device. If the
host sets Maximum level and the user password is forgotten, only an Security Erase
Prepare/Security Unit command can unlock the device and all data will be lost.
Password The text of the passwor d - all 32 bytes are always significant.
Master Password The Revision Code field is set with Master password. If Identifier is User, the Revision
Revision Code Code is not set. The Revision Code field is returned in Identify Device word 92. The valid
Revision Codes are 0000h to FFFDh. Default Master Password Revision Code is FFFEh.
FFFFh is reserved.
The setting of the Identifier and Security level bits interact as follows.
Identifier=User / Security level = High
The password supplied with the command w ill be saved as the new user password. The security
mode feature (lock function) will be enabled from the next power on. The file may then be unlocked
by either the user password or the previously set master password.
Identifier=Master / Security level = High
This combination will set a master password but will NOT enable the security mode feature (lock
function).
Identifier=User / Security level = Maximum
The password supplied with the command will be saved as the new user password. The security
mode feature (lock function) will be enabled from the next power on. The file may then be unlocked
by only the user password. The master password previously set is still stored in the file but may
NOT be used to unlock the device.
Identifier=Master / Security leve l = Maximum
This combination will set a master password but will NOT enable the security mode feature (lock
function).
5K320 SATA OEM Specification
133