Transparencies/Adhesive Labels - Oki OL600ex Setup Manual

2. Adjust the guides. Insert a sheet of paper until the printer
grips it. When using letterhead paper, insert letterhead in
first face up.
3. Set your software application for manual feed and paper
size, then issue print command.
Read Me First

Transparencies/Adhesive Labels

• Use Manual Feed
• Always use rear output.
• Should be specifically made for laser printers or
photocopiers.
• Must be able to withstand 200°C for 0.1 sec.
• Labels should cover entire carrier sheet.
• Carrier sheet or adhesive must not be exposed to any
part of the printer.
17