Selecting A Printer Driver; Printer Drivers - Oki ML3310e Setup Manual

4. Press LF.
The following line will print:
Printer Control
5. Press TEAR consecutively until the emulation you wish
to select prints in the right-hand column.
6. Press SHIFT + SEL to save your setting and exit the
Menu Mode.
SEL
LF
SEL
Micro Feed
SHIFT
MENU
Down
EXIT GROUP
POWER ALARM
Read Me First
LF
Micro Feed
Down
GROUP
Emulation Mode IBM PPR
TEAR
SET
FF/LOAD TEAR PARK QUIET
Micro Feed
TOF
Up
PRINT
ITEM SET
MENU

Selecting a Printer Driver

Before you can use your printer with software, you must enter
the software and select the correct printer driver. If you have
the wrong driver selected, you will see strange characters,
incorrect fonts, etc.
Important! See your software documentation for
information on how to select a printer driver.

Printer Drivers

The drivers below are listed by decreasing compatibility with
your printer: use one as close to the top of the list as possible.
IBM Proprinter III Epson FX
ML3310/1 IBM ML3310/1 Epson
IBM Proprinter III Epson FX286e
IBM Proprinter II Epson FX 850/1050
IBM Proprinter Epson FX 86/286
IBM Graphics Printer Epson FX
Epson FX800/1000
Microline Standard
Microline 320/321
Microline 320/321
Microline 320/321
Microline 292/293
Microline 192/193
Microline 182/183
13