Furuno CSH-5 MARK-2 Operator's Manual page 50

Item
Selects a menu; MENU-1, MENU-2 or SYSTEM Menu.
MENU MODE
Selects a picture display mode among the four below.
DISPLAY
MODE
NORM:
TEXT:
COMBI 1: Sonar Combination (Normal + Signal on Bearing Mark); The
COMBI 2: Echo Sounder Combination (Normal + Echo Sounder); When an
Deletes echo colors whose strength is lower than the strength selected here.
DELETE
Useful for eliminating noise.
COLOR
MARK ERASE Selects the item to erase with the [TX] key; COURSE (track), SHIP (own
(for scan menu ship mark), EVENT (event mark). Each pressing of the key deletes eldest
only) track, ship or event mark.
This menu chooses the function of the [R/B] key.
RANGE/
NORM - The echoes in the direction designated by the bearing
BEARING
(for scan menu
TARGET - Echo designated by the target lock mark is automatically tracked.
only)
STAB,
FISH/ALM Enables the user to set the fish alarm zone.
FISH ALARM Disables/enables the audio alarm for the fish alarm.
ALARM LEVEL Chooses echo level which will trigger the fish alarm.
10. Contents of Menu Items
This section describes the menu items available with the addition of
the CSH-5060 and external equipment.
MENU-1 (SCAN, E/S Menu)
Scan menu
NORM TEXT
Normal Mode; displays a sonar picture on entire screen.
Normal + Text; The text area appears on the lower area. This area
is for displaying own ship's position, ship's speed, course, depth
and tidal current.
echoes on the bearing mark direction appears on the lower 2/5ths
of the screen.
external echo sounder is connected, the picture from the echo
sounder appears on the lower 2/5ths of the screen.
mark are stabilized against the ship's pitching and rolling.
- Compensates for the effects of pitching and rolling. Requires
Motion Sensor MS-100
44
Contents
3/5
9/10
2/5
1/10
COMBI 1
3/5
2/5
COMBI 2