Download Print this page

GE G005 Owner's Manual page 3

Hide thumbs Also See for G005:

Advertisement

Available languages

Available languages

GEAppliances.com
PROPERINSTALLATION
This washer must be properly installed and located in accordance with the Installation Instructions before it is used.
If you did not receive an Installation Instructions, you can receive one by visiting GEAppliences.com or by calling
800.GE.CARES(800.432.2737).
[] Ensurethat the hot water hose is connected to the "H"
(internal red screened) valve and the cold water hose is
connected to the "C" (internal blue screened) valve.
[]
[]
Install or store where it will not be exposed to
temperatures below freezing or exposed to the weather,
which could cause permanent damage and invalidate the
warranty.
Properly ground washer to conform with all
governing codes and ordinances. Follow details
in Installation Instructions.
_
- Electrical
Shock Hazard
Plug into a grounded 3 prong outlet.
DO NOT remove ground prong.
DO NOT use an adapter.
DO NOT use an extension cord.
Failure to do so can result in death, fire or electrical
shock.
[]
Optional drain hose extension recommended for
discharging heights from 60" - 96"
[] This washer does not include water supply hoses.
GEstrongly recommends the use of factory specified
parts. A list of factory hoses available for purchase are
listed.These hoses are manufactured and tested to meet
GEspecifications.
GEstrongly recommends the use of new water supply
hoses. Hosesdegrade over time and need to be replaced
every 5 years to reduce the risk of hose failures and water
damage.
Parts end Accessories
Order on-line at GEApplionceports.com
today, 24 hours a
day or by phone at 800.626.2002 during normal business
hours.
Port Number
PH!4X!O002
Or
PHI4XIO005
WH49X301
Accessory
4 ft RubberWater Supply Hoses
4 ft Braided Water Supply Hoses
Drain Hose Extension
WX10X10011
WX7X1
DR07X10005
Tide®Washing Machine Cleaner*
Washer FloorTray
6' Cable
4
FUNCTIONALITYCHECK
[] If the lid is opened between cycles (i.e.not pausing and
restarting the current cycle, changing cycles after it
started, etc.) pushing the Start button will cause the
washer to turn on the cold water for 5 seconds followed
by a 10 second delay before locking the lid and starting
the cycle.
[] If the lid is opened during this !5 second period, the word
PAUSEwill start scrolling across its display. You will have
to push the Start button again to restart the cycle.
jWHEN
NOT IN USE
[] Turn off water faucets to minimize leakage if a break or
rupture should occur. Check the condition of the fill hoses;
GErecommends changing the hoses every 5 years.
SAVE THESE INSTRUCTIONS
* Tide® is a registered trademark of Procter & Gamble
3

Hide quick links:

Advertisement

loading