GE 49-4791 Use & Care Manual page 39

Table of Contents

Advertisement

Step 3:
Touch START. Display shows
the time of day oven will begin
cleaning, START CLEAN TIME,
OVEN DOOR LATCHED
and the
time of day.
NOTE: Oven automatically
figures
the starting time so cleaning
will
end when you want it to.
Follow These Steps after
Self-Cleaning
After cleaning is complete,
the
oven door will stay locked until the
oven cools and the LOCKED
light
goes off. This takes about 30
minutes.
Step 1:
When LOCKED light is off, slide
LATCH HANDLE
to the left as far
as it will go and open the door.
Step 2:
Turn OVEN SET knob to OFF.
Step 3:
Turn OVEN TEMP knob to WARM.
Step 4:
Touch CLEAR
pad.
Questions and Answers
Q. If my oven clock is not working,
can I still self-clean
my oven?
A. No. Your Automatic Oven
Timer uses the oven clock to help
start and stop your self-cleaning
cycle.
Q. Can I use commercial
oven
cleaners on any part of my
self-cleaning
oven?
A. No cleaners or coatings should
be used around any part of this
oven. If you do use them and do not
wipe the oven absolutely
clean, the
residue can scar the oven surface
and damage metal parts the next
time the oven is automatically
cleaned.
Q. Can I clean the Woven Gasket
around the oven door?
A. No, this gasket is essential tbr
a good oven seal and care must be
taken not to rub, damage or move
this gasket.
Q. After having just used the
oven, the LOCKED
light came
on and I could not move the
LATCH HANDLE.
Why?
A. After several continuous high-
temperature
bakings or broilings,
the LOCKED
light may come on.
The oven door can't be latched for
self-cleaning
while the LOCKED
light is on. If this happens, let the
oven cool until the LOCKED
light
goes off. Then the oven door can
be latched for self-cleaning.
Q. What should I do if excessive
smoking
occurs during cleaning?
A. This is caused by excessive soil,
and you should switch the OVEN
SET knob to OFF. Open windows
to rid room of smoke. Allow the
oven to cool for at least one hour
before opening the door. Wipe up
the excess soil and reset the clean
cycle.
Q. Is the "crackling"
sound I
hear during cleaning
normal?
A. Yes. This is the metal heating
and cooling during both the
cooking and cleaning functions.
Q. Should there be any odor
during the cleaning?
A. Yes, there may be a slight odor
during the first few cleanings.
Failure to wipe out excessive soil
might also cause an odor when
cleaning.
Q. What causes the hair-like
lines on the enameled
surface of
my oven?
A. This is a normal condition
resulting from heating and cooling
during cleaning. These lines do not
affect how your oven performs.
Q. Why do I have ash left in my
oven after cleaning?
A. Some types of soil will leave
a deposit which is ash. It can be
removed with a damp sponge or
cloth.
Q. My oven shelves do not slide
easily. What is the matter?
A. After many cleanings,
oven
shelves may become so clean they
do not slide easily. If you wish
shelves to slide more easily,
dampen fingers with a small
amount of cooking oil and rub
lightly over sides of shelf where
they contact shelf supports.
Q. My oven shelves have become
gray after the self-clean
cycle. Is
this normal?
A. Yes. After the self-clean cycle,
the shelves may lose some luster
and discolor to a deep gray color.
39

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jkp68g

Table of Contents