Find A Poi - Audiovox NVX225 - Automotive GPS Receiver User Manual

Once you have entered both numbers, press done to make the selection.
Tip: The quickest way to tell the coordinates of a point is to select it by tapping on the
map or by using Find, and then come to this page and read the coordinates.
Tip: If you need to reformat coordinates to the format selected in The NVX225
Navigator at 5.6.1.4, enter the coordinates in the format you have, press done to
show it in the map, then come back here to see the same location in the chosen
coordinate display format.

6.3.4 Find a POI

You can select your destination from the thousands of POIs included with The
NVX225 Navigator or from the ones you have previously created. This screen helps
you find the one you are looking for. POI items are categorized to let you locate them
more easily. On this screen you can see the first page of the top level POI
categories. There are three levels altogether.
The search will be carried out around a certain reference point. Always look at the
current reference point shown in the green field above the POI category buttons and
confirm that it matches what you want. To change the reference, tap the Change ref.
button in the top right corner.
Once you tap the Change ref. button, you are presented with these choices:
• Address: you can specify an address to be searched around, or a settlement
to search in. The centre of this settlement will be used as the reference point.
• History: the reference for the search can be selected from the History list.
• Coordinates: you can specify a latitude/longitude pair to be the centre of the
search.
84