Related Manuals for Audiovox NVX225 - 3.5" Touch Screen Jensen Portable Navigation
Summary of Contents for Audiovox NVX225 - 3.5" Touch Screen Jensen Portable Navigation
-
Page 1: User Manual
User Manual GPS navigation software for Audiovox NVX225 English Owners manual :128-8001 VER : 00... - Page 2 This manual or any parts of it may not be reproduced, transmitted in any form either electronically or mechanically (including photocopying) without the express written consent of Audiovox Electronics Corp. © Copyright 2006, Audiovox Electronics Corp. Data Source © 2006, Tele Atlas N.V. All rights reserved.
- Page 3 California and Minnesota from using suction mounts on their windshields while operating motor vehicles. Other Audiovox dashboard mounting options should be used. Audiovox does not take any responsibility for any fines, penalties, or damages that may be incurred as a result of disregarding this notice.
-
Page 4: Table Of Contents
Table of contents Warnings and safety information ...........8 General information ...............10 Operating The NVX225 Navigator (Controls).......12 Hardware buttons..................12 Screen buttons and controls..............15 3.2.1 Direct selectors ................... 15 3.2.2 List selectors ..................15 3.2.3 Sliders ....................15 3.2.4 Switches....................16 3.2.5 Special switches.................. - Page 5 4.4.10.3 The active leg of the route............30 4.4.10.4 Inactive legs of the route .............. 30 4.4.10.5 Roads in the route excluded by your preferences......30 Screens with map..................30 4.5.1 Turn preview (No. 1) ................32 4.5.2 Zoom in and out (No. 2 & 3) ..............
- Page 6 Settings ...................60 General settings ..................60 5.1.1 Safety Mode ..................60 5.1.2 Set Favorite Destinations ..............61 5.1.3 Automatic Night Colors ............... 61 5.1.4 Warn When Speeding ................. 61 5.1.4.1 Speeding tolerance ..............62 5.1.4.2 Alternative speed limit ..............62 5.1.4.3 Alternative speeding tolerance.............
- Page 7 5.6.1.5 Cockpit layout ................73 5.6.2 Backlight settings ................73 5.6.2.1 Power management ..............73 5.6.2.2 Brightness ..................74 5.6.3 Smart Zoom ..................74 5.6.3.1 Smart Zoom settings ..............74 5.6.3.2 Enable Overview mode ..............74 5.6.3.3 Restore Lock-to-Position and Smart Zoom ........
-
Page 8: Warnings And Safety Information
Warnings and safety information The NVX225 Navigator is a navigation system that helps you find your way to your selected destination. It will determine your exact location with the help of an attached GPS device. The position information obtained from the GPS receiver will not be transmitted anywhere, so others will not be able to track you. -
Page 10: General Information
General information To Enter a Destination address Skip to Page 76 of this Owners manual for detailed instruction The NVX225 Navigator is a navigation system optimized for in-car use. It provides door-to-door navigation for both single and multi-point routes using adaptable route parameters. -
Page 12: Operating The Nvx225 Navigator (Controls)
Operating The NVX225 Navigator (Controls) The NVX225 Navigator is designed for easy operation. All controls are operable by fingertips, or Stylus. Wherever possible, pushbuttons and lists are provided to make accessing functions or changing settings as easy as possible. 3.1 Hardware buttons Hardware buttons are mostly used on map screens to zoom, tilt and rotate the map, or to open other screens. -
Page 13: Back View
Back View (2) Loudspeaker - Playback language statements and warnings. (3) Stylus - Take the Stylus out of its compartment in order to use it, and replace it after use. The Stulys is for operating the touch screen. Top / Bottom View (4) MENU Button - Press it to return to the Main Menu at any time. - Page 14 Left / Right View (6) SD/MMC slot (Service Only) - Accepts an optional SD (Secure Digital) or MMC (Multi Media Card) Card for removable storage. (7) Headphone Interface (3.5mm) - Connects to a pair of stereo headphones. (8) Reset Button - Press it to reset the unit. (9) USB Interface - Interface for connecting to a PC by means of the ActiveSync (USB) Cable (for data updating).
-
Page 15: Screen Buttons And Controls
3.2 Screen buttons and controls The primary input channel of The NVX225 Navigator is the touch screen. If you read on, you will realize that most parts of the screen are not only used to display information but also to initiate functions by tapping. Below you will find a list of the most frequently used controls in the program. -
Page 16: Switches
If the value limits are not displayed at the ends of the slider, the leftmost position means the minimum value, while the rightmost position represents the maximum value. This control can be operated in two ways. Either drag the handle to move the slider to its new position, or tap the slider where you want the handle to appear (the thumb jumps there immediately). -
Page 17: Switches In The Quick Menu
Use these buttons the same way as you would other switches. Tap them anywhere to toggle between the enabled and disabled states. 3.2.6 Switches in the Quick menu The switches of the Quick menu (4.7.2) behave as normal switches but they look different in order to fit in with the other menu buttons. -
Page 18: Qwerty-Type Keyboards
This type of keyboard has large, finger-friendly buttons. If you are used to computer keyboards, you may consider trying one of the QWERTY-type keypads. 3.2.7.2 QWERTY-type keyboards QWERTY-type keyboards have both letters and numbers on them. Their layout is the same as of the standard QWERTY and AZERTY (French) keyboards. - Page 19 Although QWERTY-type keyboards also contain number keys, when entering a house number, the program offers the more convenient numeric keypad.
-
Page 20: Discovering The Program Through The Screens
The Main menu is the first screen of The NVX225 Navigator. Most parts of the program are directly accessible from here by using the buttons described below. Content Audiovox logo Battery Status indicator Button to open Cockpit screen Button to open Find menu... -
Page 21: About Screen
Button to open About screen * Depends on program settings ** Same as removing the SD card 4.2 About screen Tap About on the Main menu screen to open this screen. The About screen is not used in no It is here to inform you about the map licenses you have, the creators of The NVX225 Navigator and the legal aspects of using the program. -
Page 22: Gps Connection Indicator
GPS to calculate your current location. On the right you can see the satellite signal strength bars. Grey bars are for the grey and black bars are for the green satellites. To identify satellites use their numbers also shown in the virtual sky. The more satellites your GPS tracks (the green ones), the better your calculated position will Additional pieces of information on this screen are: current position in latitude/longitude format, elevation, speed, date, time and calculated accuracy. -
Page 23: Time Synchronization
- Black with a red cross means there is no connection with the GPS device, - Red means the GPS is connected but no GPS position is available, - Yellow means 2D reception. A GPS position has been acquired, The NVX225 Navigator is ready for navigation, but the GPS is using enough satellites for calculating the horizontal position only. -
Page 24: The Map
4.4 The map The most important and most frequently used screens of The NVX225 Navigator are the two screens with the map (Map screen and Cockpit screen). They are similar in look and in possible controls but are optimized for different uses. The map they display is common. -
Page 25: Daylight And Night Color Schemes
your way around the map. Zoom in and out to see how the map changes in either the 2D or 3D view. Changing the scale of the map is very easy. You can drag and stretch the scale (4.5.6) at the bottom of the Map screen, use hardware buttons (Error! Reference source not found.) or semi-transparent screen icons (4.5.2) on both Map and Cockpit screens. -
Page 26: Streets And Roads
Note: The colors mentioned and screenshots included in this manual refer to the default daytime and night color schemes. They may not look the same in the schemes you have chosen. Tip: If you use The NVX225 Navigator after sunrise or before sunset, look for the sun in the sky in the map background using a flat 3D view. -
Page 27: Other Objects
Tip: Major roads usually have alternative names (numbering) besides the primary name. You can choose whether to display these alternative names or not. You can set this in Map settings (5.2.3). 4.4.5 Other objects To help orientate you, the map also contains objects that have no other navigating function than to help you recognize your location on the map. -
Page 28: Selected Map Point, Also Known As The Cursor
4.4.7 Selected map point, also known as the Cursor If you tap the map somewhere or select a specific item in Find, it will become the selected point on the map, marked with a small red dot and permanently radiating red circles to make it conspicuous at all zoom levels, even when it is in the background of a 3D map view. -
Page 29: Elements Of The Active Route
These icons are large enough to recognize the symbol, and semi-transparent so as not to cover the streets and junctions behind them. When the map is zoomed out, the icons are not shown. As you zoom in, small dots appear at the locations of visible POIs. Zooming in further makes the full icons appear. -
Page 30: The Active Leg Of The Route
4.4.10.3 The active leg of the route The active leg is the section of the route you are currently driving. If you have not added any via points, the whole route will be the active leg. When via points are present, the active leg is the part leading from your location to the next via point. - Page 31 The Cockpit screen is for driving purposes. Besides showing the map, it contains some additional travel information if you are just cruising (speed, current street your are driving in, speed limit for the current street), and some more route data if you are navigating (e.g.
-
Page 32: Turn Preview (No. 1)
GPS position qualité Opens GPS Data screen Battery status Opens settings Sound on or muted Enables/disables muting Track Log recording or playback Opens Track Log screen Opens Cursor menu (Cockpit only) Current street Opens Route Information screen (Cockpit only) Travel and Route data** Opens Route Information screen (Cockpit only) Distance to next turn*** (Cockpit only) Next street***... -
Page 33: Tilt Up And Down (No. 4 & 5)
The automatic Smart Zoom function will do the necessary zooming for you when navigating (zooms out if the next turn is at a distance to let you see far ahead and zooms in when approaching a turn to give you a better view of the upcoming maneuver). -
Page 34: Cursor (No. 7)
If you manually move the map, it will freeze the map in the new position. To return to the GPS position, use this Lock button. Rotating the map in any direction will only freeze the orientation of the map, but it keeps on moving to keep the GPS position visible. -
Page 35: Menu (No. 9)
4.5.7 Menu (No. 9) This button opens the Menu with the Find engine, the Quick menu, the Route menu and the exit button that takes you to the Main menu screen. The Menu will be described in detail later in 4.7. 4.5.8 Map orientation and Overview (No. -
Page 36: Gps Position Quality (No. 11)
4.5.9 GPS position quality (No. 11) Similarly to the icon found on the GPS Data screen (4.3.3), the map screens also inform you about the GPS signal. They can show the same four values: The black satellite dish with the red exclamation mark shows there is no connection with the GPS receiver. -
Page 37: Sound Muting (No. 13)
4.5.11 Sound muting (No. 13) By tapping this button you can quickly mute all sounds of the PND. This will not modify the volume level and the enabled or disabled status of the voice guidance or the key sounds (all to be set on the Sound Settings screen: 5.3), just mutes the sound output. - Page 38 POIs nearby) appears near the selected map point if Popup Info is enabled in the Quick menu (4.7.2.4). If you do not use the Cursor menu in a few seconds, it will automatically vanish back to the bottom of the screen, and Popup Info disappears, too. You can have them reappear by reopening the Cursor menu using the arrow in the bottom right corner.
-
Page 39: Current Street (No. 16)
point. This is the way to build your multi-point route in straight order (when you wish to visit several destinations ‘go to A then to B’). This menu point is available only if a route is already active. Pin: push a colored pin in the map at the selected point for later use. This pin is visible at all zoom levels and also appears in the History list together with its exact position. -
Page 40: Distance To Next Turn (No. 18)
The only restriction is that you cannot select a value that already appears in another field. The possible field contents are: Distance to destination (default value for the left field) Time to destination (estimated time en route, default value for the middle field) Distance to next via point Time to next via point Time to next maneuver (next route event) -
Page 41: Route Information Screen
4.6 Route Information screen The Route Information screen has all the data and some of the functions you need while you navigate. Some additional functions can be found in the Route menu (4.7.3). Without an active route one of the buttons is inactive and route data cannot be displayed. -
Page 42: Distance Left
When the data corresponding to the entire route is displayed in the fields below, the line is colored the same way as the route line shown on the map. When you see data that belongs to a via point, the route is colored only up to that via point. The rest of the line remains grey. -
Page 43: Destination / Via Point
4.6.1.6 Destination / Via point This field shows the exact address (or its coordinates if the address is not available) of the final destination. If via points exist, tap and tap again any of the fields to see the address or coordinates of the first, second, etc. -
Page 44: Fit To Screen
- This icon warns you that The NVX225 Navigator had to recommend a route that does not match all your preferences given at the Route Parameters settings. - The recommended route contains areas only accessible to pedestrians. - The recommended route contains unpaved roads. - The recommended route contains roads that require a permit or permission to enter. -
Page 45: Find Tab
button brings up a menu that allows you to access some of the most frequently used functions of The NVX225 Navigator. 4.7.1 Find tab The first page of the Menu is finding. It lets you select a destination without first having to locate it on the map. -
Page 46: Zoom & Tilt
4.7.2.2 Zoom & Tilt When the green light is on, additional transparent buttons (4.5.2 and 4.5.3) appear on the left side of the map screens for zooming and tilting without the use of hardware buttons. 4.7.2.3 Night Mode Turn on or off the night colors to override the automatic color scheme switching. Note: Using this option turns off the Automatic Night Colors feature. - Page 47 Tip: To make a partly shown group fully shown, tap this button twice. First you will hide the whole group, and then you will have it displayed with all its subgroups. Tapping again the highlighted POI group (except for My POI – described later) opens the list of subcategories of that group.
- Page 48 Show/Hide: similarly to built-in POIs, you have the possibility to show or hide all POIs of the selected category on the map. Groups with a blue icon are displayed; groups with a grey icon are hidden. New: you can create a new My POI group by tapping this button. You need to select an icon, a name, and the maximum zoom level at which the POI is still visible on the map (provided you let the POI group be displayed at all).
-
Page 49: Popup Info
Here you have the following options: Delete: you can delete any of your previously saved POIs. The NVX225 Navigator will ask you to confirm this action. Edit: you can edit the attributes (name, icon and group) of a previously created POI. -
Page 50: Manage Track Logs
4.7.2.6 Manage Track Logs Using The NVX225 Navigator it is also possible to save the track logs of your journeys. This screen lets you manage all your track logs. When it comes up, it shows a list of all track logs already saved. The original name of a track log is the date and time when it was recorded. - Page 51 NVX225 Navigator. A red icon (4.5.12) is shown on the map screens to let you know that a recording is in progress. Tapping that icon opens this Track Log screen. Stop recording: if recording is in progress, this buttons stops it. Info: this button opens a screen that shows the track log details, and lets you: o Change the name of the track log (Rename button), o Change the color of the track log (Color on the map selector),...
-
Page 52: Route Tab
o Limit track DB size: here you can set whether or not to maximize the size of the database where the automatically saved track logs are kept. o Maximum track database size: here you can set the maximum database size if the track database size limit is enabled using the previous switch. - Page 53 Recalculate This function repeats the route calculation based on the same settings as used to calculate previously. This possibility is typically used when automatic off-route recalculation is disabled. However you may consider using it when you travel on a road parallel to that recommended by the route. In this case The NVX225 Navigator may not recalculate the route for some time, but you can force recalculation here.
-
Page 54: Delete
Note: When you use this feature, The NVX225 Navigator will keep on excluding the same part of the map from later routes until you manually delete the route (4.7.3.2), or restart The NVX225 Navigator. Cancel This option returns directly to the map screen without recalculating the active route. If you choose this option when manual route recalculation is configured in 5.1.5.2, navigation stops and will be activated again when you are back on your original route. - Page 55 Detailed Instructions: this is the list displayed when Itinerary is opened. It is the list of events in full detail. All significant junctions are shown in the list, even ones to be passed. Instructions: by tapping the Mode button once you will see the list of events that need your attention, i.e.
-
Page 56: Fly Over
Note: You need not open Itinerary if you run into a roadblock or traffic jam. To get an immediate alternative route use the Bypass function of Recalculate (4.7.3.1). Note: When you use this feature, The NVX225 Navigator will keep on excluding the same part of the map from later routes until you manually delete the route (4.7.3.2), or restart The NVX225 Navigator. -
Page 57: Info
Use the arrows on the right to browse through the list and tap any line to highlight it. You can perform the following operations: Add: you can add a new route point (or a new final destination if the highlighted item is the last one in the list) after the selected point. The Find menu opens automatically to let you search for an address, POI, coordinates, one of your favorite destinations, or selects a point from the History list. -
Page 58: Main Button
4.7.4 Main button The Main button at the bottom right corner leads to the Main menu screen described in 4.1. -
Page 60: Settings
Settings The NVX225 Navigator provides several settings in order to let you customize the functions of the program. The Settings screen can be accessed directly from the Main menu screen (4.1) and from the map screens by using the battery icon (4.5.10), while some of its sub-screens are accessible from other parts of the program. -
Page 61: Set Favorite Destinations
5.1.2 Set Favorite Destinations You can select two of your most frequent destinations to be your favorites (6.3.5). You can start navigating to either of them by only two taps on the screen. The original names of these points are Home and Work. You can rename them and specify their locations. -
Page 62: Speeding Tolerance
fully correct for all roads in the map. This setting lets you decide whether you want to receive the warnings or not. If you turn on this switch, The NVX225 Navigator will open a new screen to let you customize the parameters used by the speed warning. You can set two different kinds of behavior for the warning: one is applied up to a certain speed limit and the other one is used above that. -
Page 63: Off-Route Recalculation
40 km/h 50 km/h (=40 km/h + 10 km/h) 60 km/h 70 km/h (=60 km/h + 10 km/h) 90 km/h 100 km/h (=90 km/h + 10 km/h) 100 km/h 105 km/h (=100 km/h + 5%) 120 km/h 126 km/h (=120 km/h + 5%) 160 km/h 168 km/h (=160 km/h + 5%) -
Page 64: Disabled
Bypass: if you have deviated from the original route because of a traffic jam or roadwork’s, you can instruct The NVX225 Navigator to avoid the original route for a specified distance. Cancel: you can exit without recalculating the route. Navigation stops and will be activated again when you find your way back to the original route. -
Page 65: Alternative Road Names
Although the map visualization of The NVX225 Navigator is basically the same in Map and Cockpit modes, you can set a different map detail for each one, so the map is better suited for the purposes of that screen. 5.2.3 Alternative Road Names Some highways have an international name or number for foreign travelers. -
Page 66: Master Sound Volume/Switch
5.3.1 Master sound volume/switch The loudness of The NVX225 Navigator is independent of your PND settings. When you run The NVX225 Navigator, the position of this fader determines the device volume level. When you exit the program, the device settings return. The left part of this control works as a mute button. -
Page 67: Attention Tone
5.3.5 Attention Tone If this is set to Disabled, the voice guidance will sound without a preceding attention tone. Setting it to Single Tone will initiate a single attention tone before the instructions, while Double Tone will use a double tone. Note: The Mute function (4.5.11) accessible from the map screens overrides the settings on this screen. -
Page 68: Route
5.4.2 Route Here you can choose from three different route types. 5.4.2.1 Shortest Choosing Shortest will result in a route that has the smallest total distance of all possible routes between the given points. Pedestrians, cyclists or slow vehicles usually prefer this. 5.4.2.2 Fastest Choosing Fastest will result in the quickest possible route, given that you can travel... -
Page 69: Unpaved Roads
Note: Excluding a route is a preference. It does not necessarily mean total prohibition. If your destination can only be accessed using some of the excluded road types, The NVX225 Navigator will use them but only as much as necessary. In this case a warning icon will be shown on the Route Information screen (4.6), and the road not matching your preference will be displayed in red (yellow at night) on the map. -
Page 70: Permit Needed
5.4.4.5 Permit needed To use some roads or enter some areas you may need special permit or permission from the owners. These roads are excluded from your routes by default. Use this switch if your vehicle is authorized to enter. 5.4.4.6 Toll Roads Toll roads are included in your routes by default. -
Page 71: Units
5.5.3 Units You can set the distance units to be used by the program. The NVX225 Navigator may not support all of the listed units in some voice guidance languages. If you select a measurement unit that is not supported by the chosen voice guidance language, you will see a red warning message under the selector. -
Page 72: In Map Mode (And North-Up Orientation)
5.6.1.1 2D in Map mode (and north-up orientation) The normal use of the Map mode is to browse the map and look for different places on it. It is usually done in a top down view having north towards the top of the map. By default The NVX225 Navigator uses the same look for the map in both Map and Cockpit modes. -
Page 73: Coordinate Display Format
5.6.1.4 Coordinate display format Positions are sometimes displayed with their addresses, and sometimes with their coordinates. This setting lets you choose between displaying coordinates in degrees (dd.dddddd); degrees and minutes (dd mm.mmm); or degrees, minutes and seconds (dd mm ss.s). Note: the coordinate display mode is independent from the coordinate input in Find menu. -
Page 74: Brightness
5.6.2.2 Brightness With this switch you can instruct The NVX225 Navigator to use the original settings of the PND device (previously set in the operating system at Start/Settings/Backlight), or you can set the backlight level separately for both daylight and night modes, thus enhancing the effect of the night color scheme. -
Page 75: Restore Lock-To-Position And Smart Zoom
The Overview zoom level will determine the fixed zoom level of the map in both automatic and manually selected (by the Map orientation icon – see in 4.5.8) Overview modes. You can change the zoom level manually at any time (the Lock button will not be displayed), but when you enter the Overview mode again, the zoom level will be reset to this value. -
Page 76: Route Options
Uses this switch if you want The NVX225 Navigator to re-enable Smart zoom after zooming, tilting or rotating the map during navigation. This is useful if you have changed the view accidentally, or you modified it to quickly check something near your route. -
Page 77: U-Turn Penalty
When the GPS reception is poor (e.g. driving in an urban environment with a low sensitivity GPS), occasional wandering (called position fluctuation) of the calculated GPS position is likely. Although The NVX225 Navigator employs a sophisticated Lock-on-Road system that will mostly suppress these position errors by aligning your position to the recommended route and the road network of the map, sometimes the errors are too large to correct. -
Page 78: User Data Management
Note: By turning off Lock-on-Road you also turn off the GPS position error filtering. The position shown on the map will be subject to all position errors and position fluctuations. 5.6.5 User data management Everything that was saved (pins, My POIs, Favorites, track logs etc.) or modified (Settings, History lists) since The NVX225 Navigator was installed is stored in a user database located in the RAM of the PND device. -
Page 79: Remove Pins
By tapping this button you will lose all of the changes made since the time of the latest backup. The NVX225 Navigator will warn you about this before overwriting the current database with the backup. 5.6.5.3 Remove Pins Normally pins can be deleted one by one. Since they are shown at all zoom levels, and you may end up having too many of them, this button lets you delete all of them together. -
Page 80: Find
Find One of the most frequently used functions of The NVX225 Navigator is selecting the destination. Once you have the destination, you can start navigating. Getting to this point should be as fast as possible. The NVX225 Navigator provides you with a versatile search engine designed to find your chosen destination after only a few taps on the screen. -
Page 81: Using The Find Menu
Note: When appearing automatically, the Cursor menu remains open for a few seconds only. If you decide not to choose any of the actions listed, the menu closes automatically. When you open it manually, it will remain until you close it or switch to another screen. -
Page 82: Selecting The City, State And Country To Search In
You enter the module at Level 3. From this point you can go forward (down) to give the name of the street, then the house number or intersection, or backward (up) to change the city, state or country to search. 6.3.1.1 Selecting the city, state and country to search in The first screen of the address-search module is the list of recently used cities (and states in Australia). - Page 83 the program if the matching items can be displayed on one page, or displayed on more pages if you tap Done after entering some letters. Note: Postcodes may not be available for the selected country. In this case you need to enter the name of the settlement.
- Page 84 Tip: In case you are looking for a city name that has more than one word, you can reduce the list of matches faster if you enter a few letters from each word. Note: If any of the settlements listed has named suburbs or numbered districts that also appear separately in the map, a Show districts button will appear in the bottom left corner.
-
Page 85: Selecting A Street Or The Centre Of The Settlement
step is compulsory. If you press done before entering any letters, the list of settlements will appear in alphabetical order. Changing the country If your destination is in another country, tap the Change Country button in the top right corner of the state selection screen (Australia, USA, etc.), or the city selection screen, and select the country from the list. -
Page 86: Selecting A House Number Or The Midpoint Of The Street
Tip: If you are looking for an intersection, choose the street that has a rare or unusual name first. This way you need to enter fewer letters to get the list of results. You may also choose the shorter of the two streets first. This way it will be faster to choose the second one from the list of crossing streets after the first street has been selected. -
Page 87: How To Select An Intersection Instead Of A House Number
6.3.1.4 How to select an intersection instead of a house number If you do not know the house number or it is easier to pinpoint the location with an intersection, press the Find intersection button in the top right corner and select the desired street name from the list of available intersections of the previously selected street (displayed in the top centre of the screen). -
Page 88: Find Coordinates
6.3.3 Find Coordinates The NVX225 Navigator also lets you enter your destination by map coordinates. The coordinates need to be in latitude/longitude format and, based on the WGS84 earth model (the one used by most GPS devices). When you enter this page, the coordinates of the current GPS position (or the selected map point (Cursor) if Lock-to-Position is inactive) are shown at the top of the display. -
Page 89: Find A Poi
6.3.4 Find a POI You can select your destination from the thousands of POIs included with The NVX225 Navigator or from the ones you have previously created. This screen helps you find the one you are looking for. POI items are categorized to let you locate them more easily. - Page 90 The current selection is always shown in the green field at the top of the page. Note: The default reference point for POI search is the current GPS position, if it is available, or the Cursor, when there is no reliable GPS position. Once you have set the reference point, you have the following options on the Find POI screen: Search in POI subgroups: highlight one of the POI groups by tapping or using...
-
Page 91: Find One Of The Favorites (Home/Work)
Tapping OK will return to the map with the selected POI in the centre (or starts navigating to it if Find & GO was selected). Tapping the arrow in the top left corner returns to the search results. Tip: If you want to find the nearest POIs, or if you are close to one of them but do not know exactly where it is or what its name is, tap the All button on the very first screen of POI search, and get a list of the nearest POIs.