How To Set Up Frame Lock
Frame Lock Quick Start Guide
The following are the basic steps to frame locking several systems. Detailed instructions
are provided in the section
1
Set Up the Hardware
Connect all the systems together using standard CAT5 patch cabling.
WARNING! The voltage and signal on the frame lock ports are different from Ethernet
signals. Do not connect a Frame lock port to an Ethernet card or network hub. Doing so
can cause damage to the hardware.
2
Set Up the Server
Use the Frame Synchronization property page to establish the system as the server.
3
Set Up the Clients
Use the Frame Synchronization property page for each client to enable frame lock on
that system, and to add an optional delay to the sync pulse before transmitting to other
clients.
NVIDIA Corporation
Frame Synchronization User's Guide – Version 3.0
"Detailed Setup Instructions" on page
NVIDIA Frame Synchronization
14.
C
2
HAPTER
13