Pace TDC780X Operator's Manual page 11

REAR PANEL (cont.)
CABLE IN
Connect the cable service here.
TO TV Connect to the RF/antenna input on your TV or
VCR (optional).
AUDIO OUT Connect to the L and R audio inputs on your
stereo TV, stereo VCR, or optional stereo amplifier.
Connect to the electrical digital audio input on
DIGITAL AUDIO
OUT
optional digital audio equipment, such as an audio
decoder or home theater receiver.
OPTICAL AUDIO Connect to the optical digital audio input on
OUT
optional digital audio equipment.
VIDEO OUT Connect to the composite video input on your VCR
(or a standard TV).
S-VIDEO Connect to the S-video input (if present) on your
VCR or TV.
COMPONENT If your HDTV does not have an HDMI
VIDEO
connect your HDTV here.
HDMI If your HDTV has an HDMI
TM
(High Definition
it here for a digital audio/video connection
Multimedia
(instead of using the AUDIO and three analog
Interface)
COMPONENT VIDEO connectors).
IR RECEIVE
IR TRANSMIT
SATA
1394
USB
(Universal Serial
Bus)
ETHERNET
Separable security
module
(behind cover)
POWER OUTLET
(for TV only)
POWER INPUT
connector,
TM
connector, connect
TM
Connect to an optional remote "eye".
Connect to an optional VCR controller (future use).
Connect to an optional external hard disk
(if enabled by your cable service-provider).
Connect to a 1394-compatible device.
Connect to compatible optional equipment that
supports a USB 2.0 interface (future use).
Connect to an optional PC network (future use).
Removal will interrupt your service.
Connect your TV's power cord here to provide AC
power to your TV.
Connect your set-top's power cord here.
Make this connection last of all.
9