Whirlpool w10330926b Use & Care Manual page 10

7. Select cycle
pern pr_'_
TOWELS
SHEETS
NORMAL d_rks
COLORS
JEANS
BULKY ITEMS
ACTIVEWEAR
h_nd_,asf
DELICATI
HEAVY DUTY
/VHITES
QUICKWASI-
RINSE/
DRAIN DEEP
&SPIN WATER
SOAK
Turn cycle knob to choose your wash
cycle. Estimated Time Remaining
will light up with a cycle time. You may
notice time adjusting during the cycle.
This is normal.
If you do not want to begin a cycle
immediately, you may choose DELAY
WASH option.
To choose a delay time:
1. Press DELAY WASH button
to select desired delay time.
2. Press START/PAUSE.
,LLERGEN
CLEAN
WASHER
withaffresh
Est.Time Remaining
To cancel delaying a cycle:
1. Press START/PAUSE again to begin a wash cycle
immediately.
IMPORTANT: When delaying a cycle, use liquid HE detergent
only in the dispenser. Powdered detergents may absorb
moisture from a previous cycle and clump before the wash
cycle begins.
8. Select cycle settings
Heavy JHigh
Normal [Medium
Medium
[,ow
Light INo Spin
I Hot/Cold
Warm/Warm
Warm/Cold
Cold/Cold
Tap Cold/Cold
%
Soil Spin Wash/Rinse
Level Speed Temp
Once you select a cycle, the default settings for that cycle will
be lit. Press the cycle settings buttons to change the Soil Level,
Spin Speed, and Wash/Rinse Temperature, if desired. Not all
settings are available with all cycles.
NOTE: Always read and follow fabric care labels instructions
to avoid damage to your garments.
Wash Temp Suggested Fabrics
Hot
Some cold water is added to save Whites and pastels
energy. This will be cooler than Durable garments
your hot water heater setting. Heavy soils
Warm
Some cold water will be added, so Bright colors
this may be cooler than what your Moderate to light
previous washer provided, soils
Cold
Warm water may be added to Dark colors that
assist in soil removal and to help bleed or fade
dissolve detergents. Light soils
Tap Cold
This is the temperature from your
faucet.
Cold water
temperatures are used
to maintain colors and
prevent dyes from
transferring.
10