Care And Cleaning; Gas Surface Burner; Burner; Burner Heads/Caps - LG LDG3037ST Owner's Manual

CARE AND CLEANING 35
CARE AND CLEANING
Gas Surface Burner
__CAUTION
DO NOT clean this appliance with bleach.
To prevent burns, wait until the cooktop has cooled down before touching any of its parts.
Removing and Replacing fhe Gas Surface Burner
Grates and burner caps/heads can be removed for care and cleaning.
Side grate Center grate Side grate
Oval burner
Medium burner head and cap
head and cap
o mo,, u
_#_=i_; _ _ _'_-'- -- _ head and
cap
O__c_> ............ :;> ......... O Extra large burner
arge burner . ............ ....................... ©...................... ............... head and cap
'%, .......................................... ,J
head and cap
........... ...... General burner
Burner cap is properly set
Burner cap is NOT
properly set
Burner Heads/Caps
For even and unhampered flame, the slits in the burner heads
must be kept clean at all times.The burner heads and (the oval
burner head) & Cap assembly can be lifted off.
Wash the burner caps in hot soapy water and rinse with
clean water.
Any spills on or around an electrode must be carefully
cleaned.
To remove burnt-on food, soak the burner heads in a
solution of mild liquid detergent and hot water for 20-30
minutes. For stubborn stains, use a toothbrush.
The burners will not operate properly if the burner ports
or electrodes are clogged or dirty.
Burner caps and heads should be cleaned routinely,
especially after bad spiltovers.
Burners will not light if the cap is removed.
A{fer Cleaning fhe Burner Heads/Caps
Shake out any excess water and then let them dry thoroughly.
Replace the burner heads and caps over the electrodes on
the cooktop, in the correct locations according to their size.
Make sure the hole in the burner head is positioned over the
electrode.
_CAUTION
DO NOT hit the electrodes with anything hard. Doing so
could damage them.
DO NOT use steel wool or scouring powders to clean
the burners.
_J