Charge The Battery - Logitech Broadcaster Wi-Fi Webcam Setup Manual

Logitech Broadcaster, Wi-Fi Webcam

Charge the battery

6 English
1. Place the camera on the stand.
2. Connect the camera to AC power,
as shown.
Note: When the camera battery is fully charged
and powered on, the battery level indicator shows
three green lights.
Set up your product
If you will use multiple Apple devices with
the camera, set up the camera for each
device using the following instructions:
On Mac OS X®
1. Go to www.logitech.com/
broadcasterapp
2. Download and install the free Logitech
Broadcaster software for Mac.
3. Launch the software. Follow the on-
screen instructions.
4. Watch the tutorials after setup to learn
how to use Logitech Broadcaster.
On iPhone® and iPad®
1. Open the Apple® app store and browse
for the free Logitech Broadcaster app.
2. Download and install the app.
3. Open the app and follow the on-screen
instructions.
4. Watch the tutorials after setup to learn
how to use Logitech Broadcaster.
Logitech Broadcaster, Wi-Fi Webcam
Visit Product Central
There's more information and support
online for your product. Take a moment
to visit Product Central to learn more about
your new Logitech Broadcaster.
Browse online articles for setup help,
usage tips, or information about additional
features.
Connect with other users in our Community
Forums to get advice, ask questions,
and share solutions.
At Product Central, you'll find a wide
selection of content:
• Tutorials
• Troubleshooting
• Support community
• Software downloads
• Online documentation
• Warranty information
• Spare parts (when available)
Go to www.logitech.com/support/
broadcaster-mac
English 7