Table of Contents
Advertisement
ASSEMBLY
ASSEMBLY
This instructionbook is for several models. Some parts or accesso-
ries are not included on all models. Read and follow the assembly
and adjustment instructions for your mower. All fasteners are in the
parts bag. Do not discard any parts or material until the unit is
assembled.
_lb
WARNING: Before doing any assembly
or mainte-
nance to the mower, remove the wire from the spark
plug.
NOTE: In this instruction book, left and right describe the loca-
tion of a part with the operator on the seat.
PARTS BAG - CONTENTS
The fasteners and other loose parts are shown below. The fasteners are shown full size. The quantity is shown in brackets ().
71(_226
(2) Carriage Bolt
94160
(2) Knob
71(_25
(2) Wing Nut
©
71(_257
(2) Washer
O
71011_
9
710930
(6) Washer
(2) Locking Ring
327350
CHECK THE TIRES
Check
the air pressure
in the tires. Tires with too much air pressure
will cause
the unit to ride rough.
Atso. the wrong
air pressure
will
keep the mower housing
from cutting
level. The correct
air pressure
(PSI) is 14 PSi (1 BAR). The tires were over inflated for shipment
CHECK
THE LEVEL
OF THE MOWER
HOUSING
Make sure
the level of cut is still correct.
After you mow
a short
distance,
look at the area that was cut. If the mower
housing
does
not cut level, see the instructions
on "How
To Level
The Mower
Housing"
in the Maintenance
section
of this instruction
book.
710846
9
Hide quick links:
Advertisement
Table of Contents
