Table of Contents
Advertisement
Care and Cleaning
Removing
and
Replacing
the Oven
Door
The door is heavy.
For safe, temporary
storage,
lay the door
flat with the inside of the door facing
down.
To remove the oven door:
1.
Open
oven door completely,
horizontal
with floor
(See
Figure 14).
2.
Pull the door
hinge locks on both
left and right
door hinges
down from the oven frame
completely
toward
the oven
door (See Figure 15). A tool such as a small flat-blade
screwdriver
may be required.
3.
Firmly grasp
both sides of oven door along
the door sides.
Do not use the oven door
handle
(See Figure 16).
4.
Close the door to approximately
10 degrees
from the oven
door frame.
5.
Lift the oven door hinge arms over the roller
pins located
on
each side of the oven frame
(See Figure 16).
To Replace Oven
Door:
1.
Firmly grasp
both sides of oven door along
the door sides.
Do not use the oven door
handle
(See Figure 16).
2.
Holding
the oven door at the same angle
as the removal
position
(See Figure 16), seat the hook of the hinge arm over
the roller
pins located
on each side of the oven door frame
(See Figure 17). The hook of the hinge arms
must be fully
seated onto
the roller
pins.
3.
Fully open the oven door, horizontal
with floor
(See
Figure 14).
4.
Push the door hinge locks up toward
and into the oven
frame
on both
left and right oven door hinges to the locked
position
(Figure
15).
5.
Close the oven door.
Important:
Special
Door Care Instructions
- Most oven doors contain
glass
that can break.
Do not close the oven door
until all the oven
racks are fully
in place. Do not hit the glass with pots, pans, or
any other object.
Scratching,
hitting,
jarring,
or stressing the
glass may weaken
its structure
causing
an increased
risk of
breakage
at a later time.
Oven door
hinge
locations
Figure 14: Door hinge location
I
Figure 15: Door hinge locks
oven
door
0
hinge
fJ
Figure 16: Holding
door
for removal
/
roller
pin
hinge
arm
,/
Figure 17: Location
of hinge arm and roller
pin
22
Hide quick links:
Advertisement
Table of Contents
